Fuel Mixture Screw

[LazeR]

Is there an easy way to adjust the fuel mixture screw? i had to take alot of my plastic off and loosen the 2 hoses that go to the carbuerator then i had to turn my carb sideways to adjust it!

[HOT-ROD]

Originally posted by LazeR
Is there an easy way to adjust the fuel mixture screw? i had to take alot of my plastic off and loosen the 2 hoses that go to the carbuerator then i had to turn my carb sideways to adjust it! either that or try a smaller screwdriver . is the carb stock ?

[cals400ex]

i use a really thin, small skrew driver and i can get to it from the right side of the bike. its not really easy, but easier than taking off the plastic. by the way, make sure your header isn't hot when doing this.

[hondarider2006]

Originally posted by cals400ex
by the way, make sure your header isn't hot when doing this.


ahhhh go for a nice 3 hour ride, make sure you hold it WFO for most of it, and than go home and try to mess with the mixtrure screw:huh :eek2: :rolleyes: j/k

[cals400ex]

Originally posted by hondarider2006
ahhhh go for a nice 3 hour ride, make sure you hold it WFO for most of it, and than go home and try to mess with the mixtrure screw:huh :eek2: :rolleyes: j/k

believe you me, i have hit that a few times when it was hot. just to let you know, it wasn't plesent. that is why i warned you.

[LazeR]

Well asldkfjasdlfkj i guess im not talented enough, it seems like i have tried everything and i cant get to it!

[cals400ex]

the skrewdrivers i use is really thin. it is probally only 5mm think at the handle. it is probally 4 inches long or so. its tough, but it can be done.