sprocket

[400EXTRD]

I just put on a 14t front sprocket and the chain is way to loose. Is there a way I can tighten it. thanks

[JOEX]

Loosen the four allen head bolts on the rear of the swing arm.
Look to the left of the swing arm and to the right of the sprocket. There will be some 'slots', three of them I think. Use a screwdriver or similar tool, insert it an accessible slot and rotate it either up or down to adjust chain slack. I don't remember off hand which way to go but it will be obvious.

Do not force it because the material is aluminum and can break.

Joe