PDA

View Full Version : y dose the 300ex stall in water



exrider3000
11-09-2003, 07:18 PM
my 300ex stalls when it gets wet even a little water will shut it off:confused:

JOEX
11-09-2003, 07:32 PM
Make sure the spark plug boot is on tight.

Joe

300exOH
11-10-2003, 07:13 AM
Try putting dielectric grease on all of your connections. You can get it at any auto parts store.

toby400ex
11-10-2003, 08:45 PM
Maybe its the steam coming off the engine and headpipe when u get it wet, mine would do that. I blamed it on the retarded intake snorkel system.

exrider3000
11-27-2003, 06:52 PM
thanks :D

quadryda
12-05-2003, 11:55 AM
some times wen water n mud is rough alot hills i sometimes accadently hit the kill switch but every time i think stall out

300expower
12-07-2003, 05:18 AM
you could try to put water on any of the connections, you will see which one is causing this, and put some dielectric grease or a cuple rounds of electric tape, that will do the job

whe did it with the friend's blaster

damn yamaha.....

TheFontMaster
03-10-2004, 07:59 PM
check the conections between the carb and the in take. I've heard of spraying the conections with something flamible, and if there is a leak the engine will rev. I've never done this and i'm jus goin by memory.