fast250x
11-07-2003, 06:35 PM
im selling my 92 250x motor no pics sorry for 1200 for everything 5including 2 sets of stock a arms with everything you need to bolt on, i know 1 set works but not sure about the other, a set of front and back stock plastics stiched but work,progressive front shocks, im not sure how many hubs i know atleast 2 probally just needs berrings, 2 skid plates 1 metal and 1 plastic,2 carborators 1 works fine the other needs a cover,supertrap ids 2 quiet series exhaust, cdi all electronics, a few brakes, brake lines, head light,axle, 400ex axle, k&n air filter, 1 stering stem with bar clamp, black front race maier plastics,stock back shock, lonestar axle carrier, 2airboxs,kicker,1 250x frame not bent,300ex frame has some cut out of it with footpegs,1 400ex frame bent in the front, 2 300ex swingarms.
and someother stuff i cant think of now, the moter needs a counter shaft, and the motor is very cleen and over 1000 in extras, and will give all of the recipts, all work done by mt holly powersports profesionally
(motor work)
valve, in-24.51
arm, in. vlv rocker-56.79
arm ex. vlv rocker 56.79
camshaft comp-92.94
gasket, rk-18.19
gasket kit a-63.17
clim(17mm)-1.72
pin, piston-18.19
piston (os 0.25)-63.99
ring set (os 0.25)-34.75
barnett performance clutch kit-87.95
element oil filter-7.95
valve in-83.20
cylinder bore-52.00
install valves-78.00
instal clutch-208.00
plate, fixing-3.85
renthal sprocket-25.95
barnett friction plate-59.70
gasket, rk-18.86
oil seal-5.45
reverse switch-14.15
oil seal-4.78
oil seal-5.47
oil seal-4.16
bearing-19.86
oil seal-4.25
oil seal-4.25
gasket,l-13.64
guide,element-13.40
1 cover, L crank case-135.44
gasket,l-14.99
cap,cyl hd side-11.44
mikuni/keihin main jet-4.50
gasket, L-14.19
oil seal-5.20
oil seal-7.70
r&r seal-60.00
supertrapp ids-314.00
cover, r crankcase-193.69
email me at eba277@aol.com 1200obo+shipping
and someother stuff i cant think of now, the moter needs a counter shaft, and the motor is very cleen and over 1000 in extras, and will give all of the recipts, all work done by mt holly powersports profesionally
(motor work)
valve, in-24.51
arm, in. vlv rocker-56.79
arm ex. vlv rocker 56.79
camshaft comp-92.94
gasket, rk-18.19
gasket kit a-63.17
clim(17mm)-1.72
pin, piston-18.19
piston (os 0.25)-63.99
ring set (os 0.25)-34.75
barnett performance clutch kit-87.95
element oil filter-7.95
valve in-83.20
cylinder bore-52.00
install valves-78.00
instal clutch-208.00
plate, fixing-3.85
renthal sprocket-25.95
barnett friction plate-59.70
gasket, rk-18.86
oil seal-5.45
reverse switch-14.15
oil seal-4.78
oil seal-5.47
oil seal-4.16
bearing-19.86
oil seal-4.25
oil seal-4.25
gasket,l-13.64
guide,element-13.40
1 cover, L crank case-135.44
gasket,l-14.99
cap,cyl hd side-11.44
mikuni/keihin main jet-4.50
gasket, L-14.19
oil seal-5.20
oil seal-7.70
r&r seal-60.00
supertrapp ids-314.00
cover, r crankcase-193.69
email me at eba277@aol.com 1200obo+shipping