swing arm trouble

[exman]

Okay my sons 300ex blew the axle and bearing carrier right out of the swing arm on the track sunday. I am gonna have to get a new one, should I stretch him out and inch or two, if i do what does that do to the shock. It has a raptor shock with 400ex spring on it now. Its for MX only. Need some advice.

thanks

[ThorR88]

if you go plus one in the back its just gonna make it harder to wheelie... but i would just keep the stock size thats what i run...i like it better then plus 1 if you go plus 1 or 2 the shock should stil be fine..on my friends it was so good luck...i also race mx..:D

[ThorR88]

i have a 400ex back axel to sell

[bone705]

i talked to the quadshop about lengethening mine and they said they dont like to go more than an inch or so becasue they have trouble with chains flying off.

[exman]

thanks, but his axle LSR is good, the whole axle and bearing carrier just came right out of the swing arm, housing just split open like a clam, and not even where the bolts are to tighten it down. I have a pic but don't no how to post it on here uuug

[ThorR88]

lonestar is the way to go thats what i run:macho

[bradley300]

to answer your question, ading length to the rear swinger will softer the rear shock. since you have te rappy shock, just adjust the comp. a little stiffer should be all you need to do.