Mxbubs
11-03-2003, 09:55 PM
Bike is not ready yet, still waiting on John Arens to finish my frame. The bike will have all parts nearly new.
Chassis:
Arens YZ frame with 400ex geometry and stock linkage
LSR subframe
Herrmann +3 long travel arms, stem, and swingarm.
Durablue X-33 alxe
Quad rate elkas, 19". Dual rate elka on rear, all shocks fully adjustable.
Tag Metal Fat bars
Nacs hubs on front, durablue hubs on rear
Motor:
Bone stock 2000 motor with less than 15 hours total on motor
Trinity custom built pipe, all ceramic coated
Jansen Big Bore oversized radiator
Misc:
Hyper rims, 4+1 on front, and hipers 9x9 on back, all have almost new ITP mxr holeshots on them
Blue fullbore, with new carbon fiber tank cover, and new seat and seat cover
Denton rebuildable dampener
Carbon fiber case saver
250r calipers, front and rear, on 400ex spindles.
Steel lines
LSR locknut
Rad carrier
AC bumper,grab bar, skid, and pro peg nerfs
Everything on the bike is nearly new. Bike has no siezed or stripped bolts. No rust, no cracks.
As soon as John Arens gets the frame to me, bike should be ready to ship within 5 days afterwards.
Asking 9500$
Anyone interested, please email me at:
thompsoncreekrider@hotmail.com
Motor will be mounted at all 4 points. Can be a really competitive A class, Pro-am national bike, and with a little motor work and professional suspension dialing in, can be pro class competitive.
Thanks!
Chassis:
Arens YZ frame with 400ex geometry and stock linkage
LSR subframe
Herrmann +3 long travel arms, stem, and swingarm.
Durablue X-33 alxe
Quad rate elkas, 19". Dual rate elka on rear, all shocks fully adjustable.
Tag Metal Fat bars
Nacs hubs on front, durablue hubs on rear
Motor:
Bone stock 2000 motor with less than 15 hours total on motor
Trinity custom built pipe, all ceramic coated
Jansen Big Bore oversized radiator
Misc:
Hyper rims, 4+1 on front, and hipers 9x9 on back, all have almost new ITP mxr holeshots on them
Blue fullbore, with new carbon fiber tank cover, and new seat and seat cover
Denton rebuildable dampener
Carbon fiber case saver
250r calipers, front and rear, on 400ex spindles.
Steel lines
LSR locknut
Rad carrier
AC bumper,grab bar, skid, and pro peg nerfs
Everything on the bike is nearly new. Bike has no siezed or stripped bolts. No rust, no cracks.
As soon as John Arens gets the frame to me, bike should be ready to ship within 5 days afterwards.
Asking 9500$
Anyone interested, please email me at:
thompsoncreekrider@hotmail.com
Motor will be mounted at all 4 points. Can be a really competitive A class, Pro-am national bike, and with a little motor work and professional suspension dialing in, can be pro class competitive.
Thanks!