PDA

View Full Version : YZF426 Motor, ECA Frame for quad W/ Carb, Wiring, Oil Tank, Exhaust, COMPLETE SET-UP



416exmx
11-03-2003, 06:33 PM
here is what you get.

--2001 YZF426 motor, low hrs, hinson basket, 10oz flywheel weight, pc'd side covers
--FCR carb for motor
--All wiring, cables, cdi, coil and everything to make it run
--YZF headpipe with TC shorty polished silencer
--250r radiator
--Walsh-like radiator shrouds
--K&K aluminum oil tank
--Extended kickstart for 400 frame
--Frame, 400ex, that was sent to East Coast ATV, converted to accept motor and guesseted, fresh pc'd.

this is a complete set-up. all you have to do is bolt up your front-end, and rear-end, put tank, plastic, stem, and stuff like that on it. you are basicaly buying everything inside the frame including the frame.

Here is the good news. you can now own a yzf quad just like you have always wanted to. buy all this and sell all your stuff you dont need...example- your frame, motor, exhaust and everything else. for what i would probably take for all this is probably close to what you could get out of all your stuff. then you have almost the same in your quad as you did although now you have the all mighty YZF426 motor.
MAKE ME SOME GOOD OOFERS!!!! here is a pic, remember it is not the whole quad although i will sell the quad as a whole also.

http://www.imagestation.com/picture/sraid79/p0f6ff70acc0354d719777b1caa38b41b/fb124eb9.jpg

Atreyu
11-03-2003, 07:00 PM
Do you plan on partingout the rest of that beast? :blah: And what offer would be reasonable?

MOUSE
11-03-2003, 07:38 PM
you have a pm

CowsBitePeople
11-03-2003, 08:06 PM
how much for the motor and all no frame? and how much with the frame? thanks i dont know what its worth to ya

CowsBitePeople
11-03-2003, 08:06 PM
oh and that pic isnt working for me:(

KrazyKid300ex
11-04-2003, 07:11 AM
$3000?

416exmx
11-05-2003, 11:25 AM
yeah, crazykid300ex is pretty close on price. everything has to sell as a whole. the only other parts for sale on the quad will be the LT front axis and rear axis, houser swingarm, and rpm dominator axle, but that stuff dont sell untill the frame/motor and stuff sells.

pnut420
11-05-2003, 11:48 AM
Would you be willing to trade a stock frame, stock 400ex motor, low hours, with HMF exhaust, FCR39MM, all the wiring you would need, etc... + some cash. If not its cool.

Thanks,
Kevin

416exmx
11-05-2003, 11:52 AM
yeah i would, pm me.

MOUSE
11-05-2003, 02:36 PM
you have a pm

MOUSE
11-05-2003, 02:47 PM
ill put it here because im not sure your getting my pm, i have a 2002 400EX motor with low hours, 2002 frame and subframe no bends, welds,cracks, stock carb with the choke removed, stock headpipe, tc silencer, cfm large oil tank, wiring, battery, stock airbox, and a small homemade aluminum one we made to hold battery and everything. if you interested in a trade plus $$$ let me know its ready to go all it needs is to be put in a box and shipped.

416exmx
11-06-2003, 06:27 AM
sent u a pm mouse

11-06-2003, 07:02 AM
ill pay 5000 for engine, frame, swingarm, axle, and a-arms...pm me.

416exmx
11-06-2003, 08:26 AM
i pm'd you

416exmx
11-06-2003, 05:57 PM
bump

416exmx
11-06-2003, 08:54 PM
Originally posted by Atkins450
ill pay 5000 for engine, frame, swingarm, axle, and a-arms...pm me.

u ever gonna get back with me???

BigAl
11-07-2003, 07:23 PM
Hey, I sent you a PM about some Yamaha wheels.

gbf4ever
11-08-2003, 07:32 AM
hey i just sent you a email man i am eyedea69@hotmail.com

416exmx
11-09-2003, 09:28 AM
bump

416exmx
11-10-2003, 10:39 PM
TTT