killerkx327
11-02-2003, 08:36 PM
this is one sweet machine, meticulously built and maintained.it has very low hours on it and the machine comes with justy about everything you might need to be a pro level mx'er.
i have countless hours and dollars invested in this machine.it has some of the best equipment money can buy.
and i'm pretty sure it is the only YFZ in the country with a 475 stroker installed already.
it is a 475 cc stroker motor, fully ported and flowed head, TC racing exhaust, which is not on it in the pic's, sorry, but it will be by auctions end.44mm lectron carburetor.this motor makes well over 50 hp to the rear wheels.there is a ton of aftermarket goodies and hopups. there is over $12,000 invested in this machine.it has minimal hours on it, as it has been apart for quite some time for the motor work. and R&D time on the dyno. actual ride time is probably less then 6 hours.
theres a list of parts and cost below. the machine comes with alot of spares. like a brand new factory swingarm, brand new set of +3+1 a-arms, and a complete kick starter assembly to install if the winner so chooses.it also has brand new MXR holeshot tires and new douglas rims on the rear.
if you have any questions what so ever about this machine please feel free to email me at bandbracing@sbcglobal.net or call (John) at 815-389-4945 or my cell 608-201-2980.
i'm located in northern illinois. i can deliever within a reasonable distance for a small fee, or will meet the new owner part way within reason for a small fee.
the following list of parts does not cover every little thing i have added to this machine, but i hope you'll look at the pics and see that there are alot of goodies on this machine.GOOD LUCK BIDDING!
Price of yfz 450 $6800
Anti-vibe Steering stem $ 275
Renthal fatbars $ 70
Billet thumb throttle $ 125
Lonestar axle $ 395
+3+1 a-arms $ 750
K&N air filter setup $ 100
Holeshot MXR’s $ 245
44mm lectron carburetor $ 325
brake block off plate $ 15
kickstarter assembly $ 345
ported &flowed head $ 500
475cc stroker kit $1300
TC racing exchaust $ 500
Spare swingarm $ 325
TOTAL $12,070
and none of these prices even include labor charges.
price: $9500 O.B.O.
or try this link for pics yfz 475 pics (http://new.swbike.com/classifieds/messages/3595.html)
http://groups.msn.com/_Secure/0TgDTAhkYBLZD!hdfknrAep0ng9U4!RZO9I7QD1ZPn1V5Pb8xr EWnwctB9*Dxfl9p*DnIe7ixJaiWgeH44yFR2tic9oaWk!Z2mKr GGxuSKlw7CnbjcLCbew/yfz450%204.jpg[SIZE=3][SIZE=3]
i have countless hours and dollars invested in this machine.it has some of the best equipment money can buy.
and i'm pretty sure it is the only YFZ in the country with a 475 stroker installed already.
it is a 475 cc stroker motor, fully ported and flowed head, TC racing exhaust, which is not on it in the pic's, sorry, but it will be by auctions end.44mm lectron carburetor.this motor makes well over 50 hp to the rear wheels.there is a ton of aftermarket goodies and hopups. there is over $12,000 invested in this machine.it has minimal hours on it, as it has been apart for quite some time for the motor work. and R&D time on the dyno. actual ride time is probably less then 6 hours.
theres a list of parts and cost below. the machine comes with alot of spares. like a brand new factory swingarm, brand new set of +3+1 a-arms, and a complete kick starter assembly to install if the winner so chooses.it also has brand new MXR holeshot tires and new douglas rims on the rear.
if you have any questions what so ever about this machine please feel free to email me at bandbracing@sbcglobal.net or call (John) at 815-389-4945 or my cell 608-201-2980.
i'm located in northern illinois. i can deliever within a reasonable distance for a small fee, or will meet the new owner part way within reason for a small fee.
the following list of parts does not cover every little thing i have added to this machine, but i hope you'll look at the pics and see that there are alot of goodies on this machine.GOOD LUCK BIDDING!
Price of yfz 450 $6800
Anti-vibe Steering stem $ 275
Renthal fatbars $ 70
Billet thumb throttle $ 125
Lonestar axle $ 395
+3+1 a-arms $ 750
K&N air filter setup $ 100
Holeshot MXR’s $ 245
44mm lectron carburetor $ 325
brake block off plate $ 15
kickstarter assembly $ 345
ported &flowed head $ 500
475cc stroker kit $1300
TC racing exchaust $ 500
Spare swingarm $ 325
TOTAL $12,070
and none of these prices even include labor charges.
price: $9500 O.B.O.
or try this link for pics yfz 475 pics (http://new.swbike.com/classifieds/messages/3595.html)
http://groups.msn.com/_Secure/0TgDTAhkYBLZD!hdfknrAep0ng9U4!RZO9I7QD1ZPn1V5Pb8xr EWnwctB9*Dxfl9p*DnIe7ixJaiWgeH44yFR2tic9oaWk!Z2mKr GGxuSKlw7CnbjcLCbew/yfz450%204.jpg[SIZE=3][SIZE=3]