Varmit57
10-28-2003, 06:20 PM
I bought a set of wave break rotors from a guy on Ebay that was suppost to be for a 400ex. I used the fronts and put the rear in the cupboard. Now about a year later I pulled it out and noticed that it is not the right size for a 400ex.
I would like your help in identifing it.
The bolt pattern is 4 x 3 5/8" and the outside diamiter is about 7-3/8". its a custom built flamed style and has no part numbers.
Thanks......
I would like your help in identifing it.
The bolt pattern is 4 x 3 5/8" and the outside diamiter is about 7-3/8". its a custom built flamed style and has no part numbers.
Thanks......