Need Help Installing a 14 thooth front sprocket on a 300 EX

I want install a FRONT 14 tooth sprocket on my 300Ex, is there a right way and a wrong way to do this or does it matter how the sprocket goes on.

Thanks,

[305exracer11]

your not the smartest one i see, just but the spocket on lube it and ride

[Red Rooster]

I had to grind the case saver down with a die grinder to make it fit. You will be happy with the fourteen tooth c/s sprocket.

[R-Crazy]

i just put one on but the next day after i put it on, i broke my hand, long story, so i havent ridden it since i put on the sprocket. tuesday will be the day!!!!!!!!!!!!

dave

Its not that Im not that smart 305EXracer its just that I want to make sure I do it right the first time.

[kaneman23]

That was a pretty rude answer to you from 350 racer. Anyhow, I know your smart cause you drive a Tacoma!! Yes, I have a 99 Tacoma TRD and its S/C'ed.. You ever checked out www.tacomaterritory.com ? Awesome site for Tacomas...
Later,
Justin

Yea man I am a member of TTORA Mississippi. I got the sprocket replaced I just can't put the case saver back on any ideas on what I could do to get it on there.

P.S. I bet that other guy drives a FORD! HAHHAHAH


Thanks,

yeah your gonna have to grind the case saver down some. All i did was grind a little off and try it then go back and grind a little more off and eventually you'll get it to go on there. hope this helps.
jeff

[Scott]

Yeah a 14t won't fit with the factory case saver, got to modify it a little. Try sliding the sprocket/chain and case saver on at one time, you have to do the least amount of grinding that way.