PDA

View Full Version : 400ex spindles, hubs, rotors


rap169
10-26-2003, 03:59 PM
anybody have any?
luvmyex
10-26-2003, 04:07 PM
i have the rotors and hubs.One hub i couldnt get the bearing out off and tried to cut it out with a drimel.Well i cut into th ehub just a little but once new bearing are put in(which i will include) i dont think it will hut nothing.I cant get you pics if you want.
iceracer17
10-26-2003, 07:47 PM
I have a pair of hardcore racing rotors.Used 8 times like new $75 ea.
rap169
10-27-2003, 07:33 PM
bump
rap169
10-30-2003, 12:10 PM
bump
smooth
10-31-2003, 04:48 AM
i have everything you need for 500 bucks shipped
Varmit57
10-31-2003, 02:49 PM
Check my link below. I have what you need.
rap169
11-01-2003, 06:37 PM
i may be interested in your hubs and rotors if i find a good set of spindles
Varmit57
11-02-2003, 12:59 AM
I have a set of spindles to, one was broke near the tie rod and I had it profesonaly welded. I ran it the rest of the season with no problems. The bearings are about a month old.

I'd sell the set of front spindles, hubs with bearings, and Flamed wave brake rotors for $260 + shipping.

I have Pictures of them if your interested.
rap169
11-02-2003, 04:10 PM
not really intersted in the fixed spindles
sorry
Varmit57
11-02-2003, 04:17 PM
OK that is fine, you can buy a new one at Service Honda for $48...
Here is the part number.....51210-HN1-000
chris4w1
11-03-2003, 06:31 AM
i have a set of hubs, calipers, and spindles off of a 2002 400ex i am selling for 350 shipped let me know if you are interested
rap169
11-03-2003, 06:22 PM
i dont need the calipers, but do need rotors. How much wiht out the calipers?
rap169
11-03-2003, 06:23 PM
or better yet...how much for just the spindles?
chris4w1
11-04-2003, 02:19 PM
i have no idea how much just spindles go for make me a reasonable offer and i will probally accept it
rap169
11-04-2003, 06:31 PM
well i can get brand new ones for 48 each on service honda.
i dunno what ur looking to get out of them
i may also be interested in the hubs and rotors too. I dont need the calipers though
rap169
11-06-2003, 07:04 AM
bump
rap169
11-19-2003, 08:53 PM
bump
Varmit57
11-20-2003, 01:28 PM
I still have Hubs, and aftermarket flamed rotors.
exman
11-20-2003, 04:16 PM
of hubs and rotors, and no bearings seals needed

make an offer
superman
11-20-2003, 06:00 PM
I have 2 sets of 03' 400ex spindels, perfect cond!! $60 +shipping for either set, also have calipers and Merrell hubs