jtej
10-22-2003, 08:44 AM
a little background first. we traded a riding lawn mower for this 1993 300ex. the guy had spray painted the frame primer before we got it. we decided to paint the frame to make it look better. i took pics of the wiring and such, then proceeded to tear the quad down. I took the motor and set it on a 2x4 stand, and other parts in boxes, where it sat for about 6 months before i got around to putting it back together.
btw the quad had just been rebuild, with a high comp piston everything else is stock. it ran great before i tore it down.
we got the bike all back together wired up and started it up to make sure it ran. it idles fine, when you hit the gas it will go up to 1/4 throttle then it starts spitting and sputtering like it is hitting a rev limiter or something. i have a 93 300ex also so i switched the entire wiring harnesses. still the same problem, so it wasn't the wiring. i dropped the carb into the ultrasonic cleaner at home thinking it was the jets, prob. still remains, switched pipes, checked timing, throttle cable, etc... still the stuttering won't go away.
What is wrong with this poor quad??
btw the quad had just been rebuild, with a high comp piston everything else is stock. it ran great before i tore it down.
we got the bike all back together wired up and started it up to make sure it ran. it idles fine, when you hit the gas it will go up to 1/4 throttle then it starts spitting and sputtering like it is hitting a rev limiter or something. i have a 93 300ex also so i switched the entire wiring harnesses. still the same problem, so it wasn't the wiring. i dropped the carb into the ultrasonic cleaner at home thinking it was the jets, prob. still remains, switched pipes, checked timing, throttle cable, etc... still the stuttering won't go away.
What is wrong with this poor quad??