A arm help ASAP

[pineway]

I just got my new burguard +2s in today. Thisis my first time installing a aftermarket a arm, so i dont know how i should adjust the a arm ends. I guess its adjustment for camber/caster, but i dont really know. But i need to know how i should adjust these?

[TheRedRebel17]

Dont mess with teh caster....for camber, just kinda eyeball them...you want the tires to be more ! !for round tires suck as holeshots but you want it to be like / \ for tires such as radials

[pineway]

allright thanks man

[skemp]

If you want to do it correctly, take a carpenter's square and set it on the ground, and measure the distance from the top of the tire about halfway down the sidewall to the vertical edge of the square like this: 0L You will want the tire to be roughly 5/8" further in at the top than the bottom. Hopefully you understand this.

Screw the lower ball joints all the way in.. that is a must.:cool: