Douglas wheels

[416exguy]

Can I use my stock lug nuts for douglas .190 wheels? If so, do they need to be flat side in?
Thanks

[300exOH]

Originally posted by 416exguy
Can I use my stock lug nuts for douglas .190 wheels? If so, do they need to be flat side in?
Thanks

Yep flat side in.

[atl855]

i have mine flat side in

[416exguy]

Thanks, 300exOH, I checked with Douglas, but the lady didn't sound like she was to sure of herself. Thanks again.

[416exguy]

Thanks atl855.

[atl855]

i put a washer aon it so i doid not scratch them upo and then i put the factory lug on it but it does not mattre cuz i scratched them putting the 400ex in the truck right after i put my new wheels on it then i took the washers off

[416exguy]

Sounds like my luck!!

[Silverfox@C&DRacing]

I started to use the washers also my lugnuts, they were getting pretty scratched and grroved from the nut

[chrisp333]

flat side in as well. wy doesnt douglas weels have a larger hole for the tapered side???

[JOEX]

Originally posted by chrisp333
flat side in as well. wy doesnt douglas weels have a larger hole for the tapered side???
I'm guessing because of $$. More tooling, more metal......

It's not that the holes are bigger, the metal around them is thicker and tapered.

Joe