PDA

View Full Version : Who has cut down their silencer?


RIDER11X
10-06-2003, 11:14 PM
What changes in performance did you notice if any? Did this cause any jetting changes?:cool:
UglyMotha™
10-07-2003, 06:24 AM
i did with my last silencer makes you bottom end a little torqier not much but it was noticeble, also makes you bike a whole lot louder
10-07-2003, 08:03 AM
Originally posted by UglyMotha™
i did with my last silencer makes you bottom end a little torqier not much but it was noticeble, also makes you bike a whole lot louder

http://ricoracing.netfirms.com/Smilies/i'm%20with%20stupid.gif
RIDER11X
10-07-2003, 09:39 AM
Pics would be helpful too if you gottem'.;)
UglyMotha™
10-07-2003, 10:02 AM
not my bike but it is my silencer, i sold it to luvmyex



http://www.exriders.com/vbb/attachment.php?s=&postid=395969
RIDER11X
10-07-2003, 10:21 AM
That E series looks good. Did you cut it or did he?

I love my CT pipe, except it is too long and in harm's way, if I get tagged by someone that can't get stopped. I figure it's better to cut it down before it gets hit and is bent up. The endcap hits the ground when it's on the grab bar! I suppose that is why the TC pipe is so short. :cool:
UglyMotha™
10-07-2003, 12:28 PM
i cut it mainly for protection purposes not the power increase
10-07-2003, 12:44 PM
Originally posted by UglyMotha™
i cut it mainly for protection purposes not the power increase

Again, I'm gonna have to say..................http://ricoracing.netfirms.com/Smilies/i'm%20with%20stupid.gif


Here's the setup i run on mine and it's topend is unreal..:eek2:

http://ricoracing.netfirms.com/funny_pics/coffeecan_muffler.jpg
UglyMotha™
10-07-2003, 05:04 PM
did he just call me stupid twice in one thread :confused:




http://ricoracing.netfirms.com/Smilies/pissini_monkey.gifRICO



DOH :eek:


j/p muwhahah:devil:
10-07-2003, 05:23 PM
Originally posted by UglyMotha™
did he just call me stupid twice in one thread :confused:




http://ricoracing.netfirms.com/Smilies/pissini_monkey.gifRICO



DOH :eek:


j/p muwhahah:devil:


http://ricoracing.netfirms.com/Smilies/foshizzle.gif
UglyMotha™
10-07-2003, 06:20 PM
word http://ricoracing.netfirms.com/Smilies/cookoo.gif
jasoncarr25
10-07-2003, 06:30 PM
will any one do this to my t-4 for me? how much?
UglyMotha™
10-07-2003, 06:35 PM
30 bucks you pay shipping:cool:
jasoncarr25
10-07-2003, 06:51 PM
can you give me your address? ill send 30 plus what it cost me to ship. thanx. any extra to polish it? this will look as professional as the one i seen on here you posted right?
UglyMotha™
10-07-2003, 06:57 PM
the cut down part, i didn't polish it the guy that bought it off me did if you want it polished go to wally world and buy some mothers mag and a rag a put a little elbow grease to it and you'll be amazed at the shine ya can bring out i'll pm you my addy
remlapr
10-07-2003, 07:35 PM
Ugly - you have in your sig that your R-4 your running now is shortened too right? Same effect as shortening the E-series? Where you running the shortened e-series with a stock header on your 416?
sportraxrider10
10-07-2003, 07:42 PM
i shortened mine, just for protection reasons.....heres a beforehttp://www.imagestation.com/picture/sraid71/pf3c4df4342503431d40b8d603ec7fc30/fb9788cf.jpg

and heres a after....http://www.imagestation.com/picture/sraid71/pd041ed760edeb2c948709614629aaad3/fb9788d4.jpg

i ended up taking off 2 1/2 inches
UglyMotha™
10-07-2003, 07:47 PM
Originally posted by remlapr
Ugly - you have in your sig that your R-4 your running now is shortened too right? Same effect as shortening the E-series? Where you running the shortened e-series with a stock header on your 416?



my r-4 isn't shortened i had that in my sig originally cause i planned on it but never got around to it mainly cause the r-4 sets far enough under the bike i'm not worried about it the e-series was beyond the grab bar and would catch the ground or get messed up if i was re-ended i did run it with the stock header never on the 416 cause i bought the full exhaust when i did my motor my opinion if you doing it for the power gain your not really goin to feel anything from the seat of the pants maybe on a dyno
RIDER11X
10-07-2003, 11:03 PM
Anyone else got shortened silencer pics? Maybe a CT or Graydon pipe?
What did you use to make the cut so nice on the silencer?
hondarider2006
10-07-2003, 11:20 PM
here is a pretty good thread on shorting your silencer



http://www.exriders.com/vbb/showthread.php?s=&threadid=42520
RIDER11X
10-08-2003, 12:46 AM
Thanks!!!:D
10-08-2003, 06:41 AM
Here's a bills thunder pipe with 6 inches cut off..:eek2:

http://ricoracing.netfirms.com/Quad%20pics%20folder/MX%20setup/LRside.jpg
Taco
10-08-2003, 06:45 AM
Originally posted by Rico
Here's a bills thunder pipe with 6 inches cut off..:eek2:

http://ricoracing.netfirms.com/Quad%20pics%20folder/MX%20setup/LRside.jpg That aint all with 6inches cut off from what i hear:eek2: :blah:
Diedrich
10-08-2003, 10:18 PM
:D :D ..thats what i heard too
pnut420
10-08-2003, 11:06 PM
Ill get a pic of mine tomarrow, its a sparks exhuast with about 7-8 inches chopped off, its loud as hell and has awesome power, not sure how much of a difference powerwise it made, but it is way louder, Ive had people say its intimating when Im coming up on them:macho
pnut420
10-09-2003, 10:42 PM
http://www.imagestation.com/picture/sraid83/p7605d1d80b8cad21a295a3e3d80c06d6/faddd977.jpg

http://www.imagestation.com/picture/sraid83/p66946d7c59634abda62ceee249d4cfe8/fadddbba.jpg