300EX engine-parting out

[SpeedBump]

Well, the engine didn't sell on ebay, so I am going to part it out. Here it is fully assembled. I will tear it down and ship out parts as they are sold. The engine runs, but the valves or guides need to be replaced. Cam fine, BRAND NEW DID timing chain, good clutch basket, polished side cases, polished starter, break in time only on a new .40 over weisco 11.5:1 piston. No leaks, but there has been a repair made to one of the center cases, only a hairline crack, didn't really drip, but made it wet looking. These prices are open for a bit of negotiation. not much, but some. ;)
Polished side cases, left OR right $125 each
polished starter, good shape, $125
cylinder head, no cam/chain, $200(with cam/chain/valvecap-$325)
cylinder/piston/wristpin/clips, $250
clutch assembly $125
complete bottom end/tranny $175
Pics below.
http://users.adelphia.net/~cinnamonlou/pics/300engine.jpg
http://users.adelphia.net/~cinnamonlou/pics/300engine2.jpg
http://users.adelphia.net/~cinnamonlou/pics/300engine3.jpg
http://users.adelphia.net/~cinnamonlou/pics/300engine4.jpg

Thanks

[SpeedBump]

.

[YTZ250#1]

karate kid,
know wonder it dident sell you want $10,000 for it.:D .I'll give ya $200 for the whole motor.

[JimmuP21]

Well chit ill just buy a brand new one.
I would be intrested if your prices were not sky high.:eek2:

[SpeedBump]

Originally posted by YTZ250#1
karate kid,
know wonder it dident sell you want $10,000 for it.:D .I'll give ya $200 for the whole motor.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=43977&item=2431736861 There is the original auction. I will take $400, $200 is WAY low.

[SpeedBump]

Originally posted by JimmuP21
Well chit ill just buy a brand new one.
I would be intrested if your prices were not sky high.:eek2: Well, you must be a new rider, or you haven't had to buy any parts for your machine just yet. Go check the list prices, and even the prices at some other mailorder shops. Service Honda has all the prices listed. Look at what is included in my prices, and then compare that to what you would spend for new. Good luck stickin to your claim of my prices being "sky high". BTW, if you are not buying, and just interested in being cool. please find a different thread to pump up your POST COUNT. Thanks.

[Quad Dude]

give ya 500 for the motor

[westcoastmxer]

hey man i really need a center left side case thats not cracked quick!!..lemme kno at quadfmx12@aol.com quick please!

[bradley300]

a head with all parts go for 50 to 60 bucks on ebay all day long, i'll give you 60 for the head casting alone,assuming there are no cracks. no other parts needed