installing graphic kit?????????

[user101]

anyone i got any tips for putting these on. im worried about air bubbles and getting it aligned right. any help would be greately appreciated.

[spiderrider04]

when i put mine on i just took a spray bottle and lightly sprayed the plastic and the back of the graphics so you can move them around a little bit to get them right. after that i just used my finger and worked out the remaining water and air bubbles. then i went over them with a hairdryer and got out any wrinkles. i had 1 air bubble but i just used a little sewing needle to pop is.

i hope this helped, and good luck:cool:

[danney f]

Originally posted by spiderrider04
when i put mine on i just took a spray bottle and lightly sprayed the plastic and the back of the graphics so you can move them around a little bit to get them right. after that i just used my finger and worked out the remaining water and air bubbles. then i went over them with a hairdryer and got out any wrinkles. i had 1 air bubble but i just used a little sewing needle to pop is.

i hope this helped, and good luck:cool:

Thats the way to do it. I usually add a couple drops of soap to the spray bottle. Than use a phone card to work the water and air out. Works great for applying just about any decal or window tint.

[user101]

ok thanks

[zlam27]

i have a graphix kit to put on so thanks for the help guys.

anyway, user101, do you still have your pipe for sale? if not, its no big deal. just curious.

zach

[danney f]

There is a "How-To" article in the November issue of dirtwheels on page 56 for Decal installs.:D

[MotoXC33]

Last issue of Dirtwheels has a layout on it. Pics and everything...

[swamprider7]

I use "sticker on." Works great!!