PDA

View Full Version : wheel offset



terko440
10-03-2003, 04:51 PM
Was wondering if anyone else here has tried switching between 3+2 and stock offset before. And yes they are different offsets. I have +3 A-arms and with the stock offset I'm a little over 49 and the 3+2's I'm just a tad over 50. These measurement are taken of the floor and my quad has longshock quadrates so it does sag quite a bit. I realize were riding on dirt here but I was wanting some other opinions on weather or not you notice much difference with the different offsets. I want the least bumpsteer realizing I'll lose a little width but most people say they cant notice much difference as I couldnt really tell either. And I'm wondering if I should actually bring my rears in a bit so my bike isnt so square and tracks better in the whoops. Everyone feel free to give input. I'm open to the fact that i'm being anal or a perfectionist. Out!

norrisboat
10-04-2003, 01:24 PM
If you want the least amount of bump steer you should have gone with +4 aarms and 4/1 offset.

RiPPiNiTuP7
10-04-2003, 07:18 PM
your fine with +3 arms....just get some 4:1 rims and you'll be set.