PDA

View Full Version : Hotcam Stage2 Long Term Update


Steven
09-30-2003, 08:10 PM
After 100 hours, I took the valve cover off the below 440 to replace a leaking brass crush washer on the rocker arm bolt.

Anyway with the Hotcam Stage II I ran a new set of OEM rockers and all is well after 100 hours. Both the cam and rockers have no wear.

This is significant because a White Brothers Track cam ate up my first set of OEM rockers after 30 hrs.

Kudos to Hotcams!

Steve
Silverfox@C&DRacing
09-30-2003, 08:13 PM
Thanks for the update.. that is some really good news:D
kudos to hotcams:blah:
pnut420
09-30-2003, 11:47 PM
Yep good to hear this also, was this the new hotcam with the flange allen wrenched on? I just had my 426 built and put the older hotcam in, it was supposed to be one of the good ones, so Ill hope and pray.
YZROOSTINYA
10-01-2003, 05:38 AM
I have about 250 to 300 hours on my cam

its the original press on style. mine is even loose on my cam with no probs.

I have built 3 motors(4 including mine) and have had no probs yet.

my rockers had 50 hours on them when I put the cam in.
Steven
10-01-2003, 08:25 PM
It is the old Hotcam with the press on flange. Its still on there tight too. You are welcome for the update.

"Silverfox" is that Dusty or Colby??

hello,
STEVE SCIALLI...
cals400ex
10-01-2003, 10:42 PM
Originally posted by Steven
It is the old Hotcam with the press on flange. Its still on there tight too. You are welcome for the update.

"Silverfox" is that Dusty or Colby??

hello,
STEVE SCIALLI...




dusty