XANDADA
09-29-2003, 09:12 AM
Made the following change and now my R runs like crap :mad: -
I removed the aluminum air box (with outerwears cover on top) and installed the oem plastic with snorkle & EHS modified outerwears lid. I also changed from a K&N filter to a foam filter. I figured that jetting shouldn't really change at all but I guess I was wrong. The engine runs great in 1-2 gear but the top of 3rd gear when it hits the powerband starts to stumble and sound like it is misfiring (not really bogging but missing). 4th -6th gear is all bad from 1/4 throttle to full throttle. Almost acts too lean, what do you guys think? Go richer on main jet and see what happens? I can't beleive I would be getting more air with this setup to create a lean condition. Thanks for any suggestions...
I'm using a 38tmx carb
I removed the aluminum air box (with outerwears cover on top) and installed the oem plastic with snorkle & EHS modified outerwears lid. I also changed from a K&N filter to a foam filter. I figured that jetting shouldn't really change at all but I guess I was wrong. The engine runs great in 1-2 gear but the top of 3rd gear when it hits the powerband starts to stumble and sound like it is misfiring (not really bogging but missing). 4th -6th gear is all bad from 1/4 throttle to full throttle. Almost acts too lean, what do you guys think? Go richer on main jet and see what happens? I can't beleive I would be getting more air with this setup to create a lean condition. Thanks for any suggestions...
I'm using a 38tmx carb