View Full Version : Head bolt tourqe specs?
ILGNCC400EX
09-15-2003, 06:19 PM
My service manual has walked off and i need to tourqe my head bolts and valve cover bolts and i need to know the specs.
Silverfox@C&DRacing
09-15-2003, 07:42 PM
I believe that the cylinder head and base are 34 ftlbs
terko440
09-15-2003, 07:50 PM
Sorry Dusty but your off a foot pound! doh! It's 33 footpounds and the valve cover they tell you to tighten them (securely) I almost stripped one out torquing them to 10 pounds use a small socket rachet(1/4) drive for mimimal leverage. And try to tighten both the head and valve cover in a criss cross pattern of course. Hope this helps.
F-16Guy
09-15-2003, 08:33 PM
I wouldn't go too much over about 60 in/lbs on the rocker cover bolts. A good mechanic knows where to set his "elbow" torque wrench! lol:p
ILGNCC400EX
09-15-2003, 10:57 PM
its a goen thanks alot
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.