PDA

View Full Version : Parting out 86 250R race bike.



RobRacing
09-11-2003, 03:10 PM
I have decided to part out this race bike. The following is a list of aftermarket parts. Let me know if you want anything.

Chassis...$500
A arms and tie rods...$75
Swingarm...$150
Shock linkage...$100
rear brakes complete...$175
front brakes complete...$210


AC front bumper...$20
Holeshot MX front tires on Dougles red label rims...$100
Front durablue graphlite wheel spacers...$25
Front steel braided brake lines...$50
Lonestar steering stem...$200
Custom Axis triple rate front shocks pre load only...$750
tag T2 CR hi bend handlebars...$75
Lonestar antivibration handlebar mount
CR 250 style clutch lever and perch
DG steel nerf bars...$40
Custom axis rear shock fully adjustable...$600
OMF scoop and louver kit...$60
lonestar bearing carrier...$150
Rear steel braided brake line...$50
durablue elimantor axle...$200
Holeshot MXR's on ITP black bead lock wheels 18x10x9...$250
AC racing rear grab bar...$30
Primary drive rear sprocket
PBR front sprocket
RK X-ring chain

Engine...$750
Minus carb, pipe and silencer, comes with electronics, minus reed cage. Has rebuilt tranny, .40 over piston, mild porting, DP clutch strong running engine.

Paul turner 89 race pipe and fatboy silencer....$200
Duncan 38mm air stryker carb...$175
boysen rad vavle...$60
reed spacer...$15

I have the hole bike to part out. E-mail me with any offers on any of these parts or if you need something else. I have everything 250R.

09-14-2003, 09:58 AM
Email addy????

Chanman420q
09-14-2003, 10:27 AM
if the handlebars come with a clamp and it will work for a 400ex ill take them

gun32boarder
09-14-2003, 10:53 AM
does the frame have any cracks in it what color is it. will you take 1600 for the frame, engine, pipe and silencer, reed cage, and both set of brakes? im assuming the frame and stuff comes with the bolts right?

yamadooski
09-14-2003, 10:58 AM
I will take the front and rear AC bumper and rear grab bar.
I also need the seat latch.
I also need all the spare nuts and bolts too.

RobRacing
09-14-2003, 12:22 PM
My e-mail adress is RobRacing@comcast.net

Chanman420Q:
The handlebars come with a clamp, Let me know how you want to pay for them.

gun32boarder:
The frame is crack free. It is a deep blue color. I will take 1600 for all the parts you listed. Do you need the electronics for the engine? The frame will come with any bolts you need.

yamadooski:
Done deal with the front and rear bumper and grab bar and seat latch. I have already sold the hardware.

E-mail me or post a reply with your responses.

Rob

Glamis400ex
09-14-2003, 12:40 PM
Is your clutch perch and lever an EZpull? What brand? How much?

Glamis

gun32boarder
09-14-2003, 01:07 PM
i emailed you

gratzracing24
09-14-2003, 01:42 PM
how much for the shocks and the foot pegs?

250rquadracer
09-14-2003, 01:49 PM
hey can you send me pics of the paul turner pipe and silencer

send the pics to bmxrox189@hotmail.com

thankz

RobRacing
09-14-2003, 01:57 PM
Glamis400EX
The clutch perch and lever is not an EZ pull. It is just an off the shelf CR 250 perch and lever so I could elimate the parking brake deal. I will sell them both for $15.00

Gratzracing24:
Depending on what shocks you want is what the price will be. The rear is going for $625. And the front pair are going for $675. I will sell the footpegs for $30.00

250rquadracer
09-14-2003, 02:08 PM
hey can you send me pics of the lever and perch and the back sprocket and want size is it ??...and pics of chain and how much

250rquadracer
09-14-2003, 02:25 PM
hey can you also send me pics of your black beadlocks with holeshots

to bmxrox189@hotmail.com thanks

Chanman420q
09-14-2003, 07:51 PM
hey ill pay with a MO, but i need to know first if the clamp will fit on the 400ex stock stem

RobRacing
09-14-2003, 07:54 PM
The clamp kit is one of those universal ones. It fits inside your stock bottom mounts and adds a 3/4 inch rise to the bars. I will im you with the total amount.

RobRacing
09-14-2003, 07:55 PM
The clamp is going to cost an extra $10 also.

Chanman420q
09-14-2003, 08:39 PM
ok PM me with all the info ill need

seven
09-14-2003, 08:44 PM
Send me a pic of the frame and any info on it. seven13@mindspring.com