race readdy quad!!!(need)

[westcoastmxer]

i need a race ready 400ex or 300ex or 250r!...tell me wut u got.

[quadcustoms]

i am in tennesseei have a 99 400ex with r4 pipe
lonestar axle
brand new maier fenders
+1 stem with tag bars
full belly skid
swing skid
front beadlocks shamrocks with razors
ac front bumper
one industries seat cover
ac nerfs
this bike is low hours and is very nice and dependable
3500.00
email for pictures bullard1974@comcast.net

[westcoastmxer]

thanx but i meant mx ready!

[quadcustoms]

you have some cash i have a lonestar yzf
13000.00 lobo front lonestar axis rear
fully race ready needs nothing but balls

[300exQuadracer]

i have a 2000 300ex for sale it has a full cobra exhaust with high flow headpipe, k&n,DG bumper, DG nerfs,dg full body skids, professionally reinforced dg swingarm skid, 13 and 14 tooth front sprockets,lime green Powdercoated frame, motor mounts and orange powdercoated steering stem, top clamps, battery bracket, professional auto body orange painted a-arms,new maier shiny zest orange racecut fenders with front add ons, Fly Handlebars, tailight, brand new fast trekker rear tires, 20x10x9, and 75% tread on 400ex front tires, new bearings and seals all around and a brand new RAD Bearing carrier, parking brake block off, stock exhaust, this quad will keep up with my buddies 400 and i havent even got into the motor yet! alls you would need is shocks and it would be race ready, i can keep with the big boys on the track and lots of people underestimate the power of a 300
alls i am asking is 2,800 maybe a little more if you would want to meet half way

[400grl]

I'm getting ready to sell my Yamahonda (the one with the Rappy hood on it...)
Here is what's on it:

2001 440EX
WB 440 kit (JE piston/LA sleeve/11:1 ratio)
WB MX Cam
Lonestar +1 Swingarm (silvervein – almost new)
+3+1 Ricky Stator A-Arms and Tie Rod set (silver)
+4 Dominator Axle
E-Series Slip-on with all disks
K&N Filter/Outerwear and Jet Kit
Elka Triple Rate SSD’s with rezzie’s (set up for a 130lb rider)
Rear Elka SSD Rebuild (set up for 130 lb rider, but feels a little stiff)
AC Racing Bumper (newer style)
WB Nerf Bars
ProRacing (?) brake lines up front (red)
Renthal bars/grips
Pro-Design Kill Switch
Rappy hood installed on front end (have headlight assembly available if you want it)
19” Holeshots on front (about 50% tread)
20” Shredders on the rear (about 40% tread left – need new tires!)
Dirt Digger Clutch
Hinson Clutch Basket
Tinner Air Scoops
SKIN Industries seat cover

It's going into the local Cycle Trader here tomorrow, but if you want it, I'm asking $5900....plus whatever shipping or whatever it is to get it to you...... That's with the Elka's. If you already have nice shocks, then I'll kep the Elka's and give it to you with the stockers for $5500 (the rear is a rebuild, so it stays with the quad)

I'm getting out of racing for a while to buy a house....then I'm going to buy something new. This is an awesome quad. I can't believe I'm even selling it...... :(

[AtvMxRider]

Originally posted by 400grl
I'm getting ready to sell my Yamahonda (the one with the Rappy hood on it...)
Here is what's on it:

2001 440EX
WB 440 kit (JE piston/LA sleeve/11:1 ratio)
WB MX Cam
Lonestar +1 Swingarm (silvervein – almost new)
+3+1 Ricky Stator A-Arms and Tie Rod set (silver)
+4 Dominator Axle
E-Series Slip-on with all disks
K&N Filter/Outerwear and Jet Kit
Elka Triple Rate SSD’s with rezzie’s (set up for a 130lb rider)
Rear Elka SSD Rebuild (set up for 130 lb rider, but feels a little stiff)
AC Racing Bumper (newer style)
WB Nerf Bars
ProRacing (?) brake lines up front (red)
Renthal bars/grips
Pro-Design Kill Switch
Rappy hood installed on front end (have headlight assembly available if you want it)
19” Holeshots on front (about 50% tread)
20” Shredders on the rear (about 40% tread left – need new tires!)
Dirt Digger Clutch
Hinson Clutch Basket
Tinner Air Scoops
SKIN Industries seat cover

It's going into the local Cycle Trader here tomorrow, but if you want it, I'm asking $5900....plus whatever shipping or whatever it is to get it to you...... That's with the Elka's. If you already have nice shocks, then I'll kep the Elka's and give it to you with the stockers for $5500 (the rear is a rebuild, so it stays with the quad)

I'm getting out of racing for a while to buy a house....then I'm going to buy something new. This is an awesome quad. I can't believe I'm even selling it...... :(



:(

[400grl]

yeah....I know...I'll probably cry when it goes....but I am getting a new one soon, so it's not gonna be so bad. Nothing quite like the smell of a new quad in the garage! ;)

[westcoastmxer]

yea i like that quad(i saw it in dirtwheels).u and your quad look nice!...lol:D

[AtvMxRider]

Originally posted by 400grl
yeah....I know...I'll probably cry when it goes.... quite like the


Well if you need somebody to talk to or a shoulder to lean on or a lap to jump in I'm here..........:devil:

[haydug]

I have a trick 2001 400ex, you can find it in the for sale forum of cannondaleriders.com or search this forum under 2001 400ex new and trick.

[416exmx]

i still have the 330ex for sale. also an Axis/Houser/Baldwin yzf426 for the serious mx'er. look at my sig for a few mods on it.

[airtime]

2001 lonestar no-link 250r, full lonestar quad except for nickle plated +2 laeger a-arms, pep zps shocks, red frame with red full bore plastic, new rear turf and front holeshots, bead locks in rear. riden very little since built, approx. 40 hours on quad. everything is new, bearings, tie rod ends, brake rotors, etc... motor was just completely rebuilt ($1200), 310 pro-x cylinder, ported for mx by tmm, sparks chrome mx pipe, no cracks or breaks, never crashed. motor has had one tank of gas since break in. $9500 firm geraldhocutt@hotmail.com

[quader400]

my 400ex. you can look in my sig for what its got on it.

[ride_red_ex]

I have a 1989 250R with a CT 310 kit. Tons of extras and very clean also has a lot of chrome. Let me know if you are interested in details. Would want around 5500. Is this close to what you are looking for or does it spark an interest. Just let me know.

[Davemx250r]

2002 louvins framed 265R. Louvins swinger, jrd +3 Longtravel front end, elka fullyadjustable front shocks. Axis dual adjustable rear. Motor bottom end is all new, top end has 10 hours on it. Shocks were just serviced this past spring. bead locks all around, laeger stem, rpm axle. Its the sh**, i hate to let it go but im trying to sell it to get money for a truck. Im located in southern Missouri. Email me for pics im "ASKING" $7000 Its extremly clean and fast. email dheadberg@yahoo.com

[YTZ250#1]

00 lonestar 265R 1 race on complete rebuild.$6,000 firm before I
start tearing parts off it.if intrested I can email pics and more info.

[westcoastmxer]

sorry guys im lookin 4 sumthin a lil cheaper and a 4 stroke.

[michael meyers]

i have a pretty nice 2001 330 ex i will sell you, its not quite set up for mx though. 3k OBO

[kicker696]

i've got a roll design/janssen racing 265r for 4000