Hiper question

[spincr4hire]

What is the best way to get a tire to seal on a Hiper? I've heard many different recommendations, none have worked. :grr:

[bradley300]

i would use plenty of wd-40 on the bead of the tire and the rim, put a ratchet strap around the tire, and also, trim the inside edges of the bead on the tire with a razor blade, sometimes there is a little xtra rubber there.

[mx400]

i use window cleaner to get all my wheels atvs or car/truck to seet in the tires

Little tire wet on the edges, then pump it up. Thats all it took to get mine sealed:confused:

[lil400exman]

check the inside of the wheel and make sure the o-rings are good and tight i know they can lose air through there.........;)

[spincr4hire]

already done everything suggested above, I may have a bad Holeshot.

[lil400exman]

i think you may hipers are some hi-quality wheels!:D :cool:

[GNCC#829]

I have to tighten the beadlock bolts to higher than the recomended 6psi for mine to seal.;)