polishing

[EXtreme]

I just found out my mothers boyfriend has a dremel w/ all the polishing bits and I was just wondering what all on an ex can be polished? also please post any pic of some polishing work THANX:cool:

[RiPPiNiTuP7]

throttle cover, brake reservior cover, engine side cases, motor mounts, etc., etc...

[L.Vegas400]

its kinda hard to larger stuff with a dremel cause you get the swirl marks from such a small wheel. the easy ones you can do are throttle cover, oil filter cover, starter cover, crank and timing mark plugs, motor mounts, brake rezzi cover(with the words left black).

[ewalker302]

Best tip 4 polishing dremel or by hand.

Mothers aluminum polish.
Little red can w/ white lid

Enough time & elbow grease on any metal surface------you'll be shinin like a diamond.

:bandit:

:o :cool:

http://pictureposter.allbrand.nu/pictures/nacsracer27/4+items.jpg

[Diedrich]

try something small first like your throttle cover..it takes a lot of time man so just keep polishing until it looks like a mirror

[300expower]

do motor mounts on a 300ex are ¸polishable also or they will rust ?

too bad 1 trip out in the mud and your polishing is for chit....:ermm:


Get it chromed for long lasting shine....;)

[sickmojave]

Originally posted by Rico
too bad 1 trip out in the mud and your polishing is for chit....:ermm:


Get it chromed for long lasting shine....;)

OR clear coat it when your done ;)

[Rip_Tear]

Originally posted by sickmojave
OR clear coat it when your done ;)

I would suggest a clear PC cout, regular paint doesnt last long and can "offset" the polish.

[danney f]

Originally posted by 300expower
do motor mounts on a 300ex are ¸polishable also or they will rust ?

Sorry, but no.