PDA

View Full Version : how to position before jump so that I...



KASCHAK
09-04-2003, 03:42 PM
i want to know how to stand on the quad. back down a little or what ever so that i get more discanve rather then height. the jump is about a 40 degree angle but in 3rd luggin then pin at the bottom i get allot of height like 8 feet. and botom out and only about 5 feet out. i want to get more distance??

Narly R
09-05-2003, 10:06 AM
Its kinda hard to tell, you can always pre- load to get higher, but to get farther is hard to do I think, just try not to get a lot of hop of the jump.... try differnt posisions!:ermm:

44oEX
09-05-2003, 10:34 AM
I would say try to hit the jump at a steady trottle instead of giving it at the base of the jump.

When the dirt bike guys try to do step up jumps they give it gas just before they hit the jump to get height. So just keep it steady.

hessianmx111
09-06-2003, 10:38 PM
mcgrath pulls the bike into his body going up the up ramp and in the air to stay low

D-4our
09-08-2003, 09:50 PM
well if the jump is built for hieght thats the way its gonna send you unless you build it differently. like they said, pre-loading obviously sends you up that much higher so just try and keep a steady throttle when hitting the jump and you should be set.

hondarider27
09-15-2003, 11:14 PM
you'll probable need to work on the lip. maybe it is to steep for what you want to do.