400ex clutch perch?

[mikealexander88]

who makes 400ex clutch perches? i need an aftermarket one so i can get the 400ex levers for my R so it has the grips on the levers, thanks- mike

[Meek]

MSR

dont get an ezpull...it breaks cables...get the MSR

[Meek]

I have been using an easy pull with the shorty leaver for 9 months now, and I have had no problems so far. I did replace my clutch cable 2 weeks ago, but it was not broken just warn out.

[mikealexander88]

will the 400ex levers fit on the cr clutch perch? or mabee the xr? i need a new brake lever too and i would just get the grippy ones for the 400ex, that way i would save a few bucks. anyone know?- mike

[spliffy]

Originally posted by Crazy400exMan
dont get an ezpull...it breaks cables...get the MSR


I agree... I just went thru one this weekend with my ezpull & the cable only has around 10 - 15 hrs on it or so. :mad: :mad: I think its time for a hydro clutch..... :macho

I ran an easy pull/Cr250 clutch lever and perch for 2.5 years and I just replaced my stock cable. Not freyed anywere....:confused:

Lube the mofo up and you'll be surprised at how long a cable can last....;)

[RiPPiNiTuP7]

rtc is the only way to go imo

[spliffy]

Mine just snapped right at that perch... I suppose it could have been a crappy cable even tho it was new, it was a motion pro cable which I thought were ok.. but if I don't get the hydro clutch I will just go buy a Honda cable.

go to ur local honda shop and they will hook u up with a perch and the shorty lever for about 25 bux.

[Ironballs]

A clutch perch off of a xr 400 dirt bike works with the stock ex clutch lever. They're only about 8 bucks and work better then anything I have ever used. The cr lever is diff.

[mikealexander88]

thanks iron balls that's exacly what i needed for info, i will be ordering my new levers and perch asap, thanks- mike

[Meek]

[i]Lube the mofo up[/B]

:eek2: :eek2: