NITRO1253
08-28-2003, 01:30 PM
86 250r must sell heres the goodies-
chassis-
stock frame no cracks anywhere, never welded on, fresh paint
works triple rate front shocks
complete ohlins rebuild rear
every bushing @ bearing in the whole bike has 3 rides on them
fast trekker tires all arounds with 190's in the back
and omf race wheels up front
Renthal bars and leagar stem
new brake pads
speed racing pb block off
polished peices all around
full ac chassis skid
aluminum swingarm skid (unsure what brand but very beefy)
dg nerfs
ac front bumper and prm rear bumper
east coast tapered bearing carrier
body-
maier race cut one peice front plastic with the low profile
in the back , red in color
clark oversized tank (also red)
blue ceet seat cover
motor-
86 motor new top and bottom end, new crankshaft, bearings,
and seals were bought from HONDA and installed.
86 cylinder .10 over stock with proX piston and rings.
billet water pump cover, case saver, and exauhst flange
fmf fatty pipe with a dg silencer that was customized
38 mm airstryker, boysen reeds, uni filter, with aluminum airbox
rings
hinson clutch basket, cr500 springs, oem honda clutch, 89
update kit.
new counterbalancer and holder.
im sure there is more i will update as it comes into my head
4800 or b/o will also trade for a larger 4 stroke quad with
similar mods. located in nj but and willing to drive
Nitro1253@aol.com
Aim-nitro1253
chassis-
stock frame no cracks anywhere, never welded on, fresh paint
works triple rate front shocks
complete ohlins rebuild rear
every bushing @ bearing in the whole bike has 3 rides on them
fast trekker tires all arounds with 190's in the back
and omf race wheels up front
Renthal bars and leagar stem
new brake pads
speed racing pb block off
polished peices all around
full ac chassis skid
aluminum swingarm skid (unsure what brand but very beefy)
dg nerfs
ac front bumper and prm rear bumper
east coast tapered bearing carrier
body-
maier race cut one peice front plastic with the low profile
in the back , red in color
clark oversized tank (also red)
blue ceet seat cover
motor-
86 motor new top and bottom end, new crankshaft, bearings,
and seals were bought from HONDA and installed.
86 cylinder .10 over stock with proX piston and rings.
billet water pump cover, case saver, and exauhst flange
fmf fatty pipe with a dg silencer that was customized
38 mm airstryker, boysen reeds, uni filter, with aluminum airbox
rings
hinson clutch basket, cr500 springs, oem honda clutch, 89
update kit.
new counterbalancer and holder.
im sure there is more i will update as it comes into my head
4800 or b/o will also trade for a larger 4 stroke quad with
similar mods. located in nj but and willing to drive
Nitro1253@aol.com
Aim-nitro1253