350x swingarm on a 250x

[250xR#271]

my stock swingarm is cracked so i wanted to put a 350x one on, but the problem is I have an aftermarket tapered bearing carrier.

The question is does anyone know if the 250x bearing carrier will fit in the 350x swingarm?

[CBW]

WHEN I REBUILT MY 86 350X SWINGARM I GOT A BEARING CARRIER FORM LSR. THEY SAID THAT THE CARRIER FOR THE 250X AND 350X WERE THE SAME. HOWEVER THEY WERE DOUBLE ROW, NOT TAPERED. ALTHOUGH I THINK ALL THE TAPERED CARRIER DOES IS LIMIT YOUR ADJUSTMENT.

TRY IT I THINK YOU ARE PRETTY SAFE

[250xR#271]

ok I got the 350x swingarm and shock now but the problem is the place where the bolt goes through to connect the swingarm to the frame (where the bearings go in) is shorter than the 250x.

I've heard of people making this swap so what did they do to make it work? Use spacers to make it fit?

Anyone who has done this before any info would be helpful.

Thanks

["BLAHH"300!!]

....250r a-arms on a 300ex??....look on page 2 on this thread in the stearing and suspention part....look for a post by "COUNTYPARK"....he explaind all that to me the other day...gives you +1 and used a spacer to make it work...go check it out....