Trade 600 ninja for warrior engine

[DREWS400EX]

I have a wrecked 89 600 ninja with a good engine and want to trade it(or the whole bike) for a good warrior motor. Let me know what you have.

[pnut420]

I have a 99 400 ex motor, the bottom end in in great shape, the cylinder could used honed or possibly a bore kit, needs a fresh piston, I have a TC GNCC grind cam that I bought to put in it.

The motor is apart right now, but all it needs is the cylinder put back on, I have the valve cover gasket, the stock cam is is great shape, I also have a TC GNCC, the timing chain could be replaced with an XR timing chain, other than that runs great, might even sell the stock exhaust and carb. The clutch seemed be working great stll also.

[pnut420]

I would just want the engine and all the electrical to make it run, ignition switch, speedometer and all that.....

[TheOneYouHate]

whats wrong with the whole bike?do you have any pics of it put together?

[DREWS400EX]

I need a warrior motor because I have a warrior and the motor needs a crank. I want this warrior running by friday.

As for the bike, its totaled. It didnt come with any plastics and the subframe is broke. I can get pics tomorrow if your still interested.

[TheOneYouHate]

how much would you sell it for? im still interested.... email pics to atmmxrider400ex@yahoo.com Thanks:)

[DREWS400EX]

I just got a warrior motor. The ninja is still for sale or trade. Let me know, I can ship if needed.

[derekhonda]

do you ahave an extrta top end for that warrior? (cylinder, sleeve, piston, head, and oil pump by chance)

[DREWS400EX]

Originally posted by derekhonda
do you ahave an extrta top end for that warrior? (cylinder, sleeve, piston, head, and oil pump by chance)
No, the motor I just got is missing the head and cylinder, so I have to use my old ones.

[DREWS400EX]

bump
This thing will make a quad very fast!!!!!!!!!!!!

[CowsBitePeople]

how much for whats left of the whole bike?

[DREWS400EX]

Originally posted by CowsBitePeople
how much for whats left of the whole bike?
Make me an offer.



Ill consider anything for trade dirtbike, quad, good dirtbike or quad rolling chassis or motors.

[CowsBitePeople]

well let me get a pic:) ill see what i can do.... email is CowsBitePeople@yahoo.com Thanks

[DREWS400EX]

Heres a couple of pics. Thats my warrior tank sitting on top because the ninja tank leaked. I just cleaned the carbs.
http://www.imagestation.com/picture/sraid77/p070e721a1e3c4d391bc274b72ce10af9/fb369ef5.jpg http://www.imagestation.com/picture/sraid77/pbaab596d3a160edc7ead72d0d30648d8/fb369efc.jpg

[CowsBitePeople]

the pics arent working for me it says im trying to access them from outside of imagestation or something:confused:

[DREWS400EX]

Can you see the pics now? I think I got it fixed.

[CowsBitePeople]

ok yeah i can see but its hard to see the pics they are very dark....well i dont know how much it is work so shoot me a price we can go from there

[DREWS400EX]

$400 you pick up if you want the whole bike, or $400 plus shipping if you want the motor, carbs, and wiring harness.

[CowsBitePeople]

how many miles on motor? does it roll?like the whole thing? is the frame bent? or forke or swing arm tell me what it needs to be legal again because i was thinking a nice project bike or whatever before i get my motorcycle liscense:)

[DREWS400EX]

Originally posted by CowsBitePeople
how many miles on motor? does it roll?like the whole thing? is the frame bent? or forke or swing arm tell me what it needs to be legal again because i was thinking a nice project bike or whatever before i get my motorcycle liscense:)

24,000 miles, I started it today and had it going through all gears on a jackstand. I didnt get a title for it and dont know much about getting one. I got the bike to put the motor in my warrior frame, so I wasnt worried about a title. As for what it needs is the rear subframe, all the plastics, tank, headlight, and maybe some other small things.

[CowsBitePeople]

So it moves? like if u set it on the ground it u could drive it around?

[DREWS400EX]

Originally posted by CowsBitePeople
So it moves? like if u set it on the ground it u could drive it around?
I forgot to say the left side handlebar is broke off, but I guess you could ride it with one hand on the good side and try to hold on to the clutch side thats hanging by the clutch cable.

[CowsBitePeople]

Ok how much u think it would be to ship the whole bike to nj??

[DREWS400EX]

I will only ship the motor, I dont have time to crate and find a company to ship the whole bike. Plus I've never shipped anything that big before.

[CowsBitePeople]

Originally posted by DREWS400EX
I will only ship the motor, I dont have time to crate and find a company to ship the whole bike. Plus I've never shipped anything that big before.

crap can u take off the forks and swingarm and rear wheel and send them in a seperste box or something? or squeeze it together? to fit in a smaller thing?:)

[DREWS400EX]

ups has a 150 lb weight limit, so I guess I could use 3 or 4 big boxes. It could get expensive.

[CowsBitePeople]

if i found i shipping company and stuff coulfd u ship it? how much it weigh all together estamate at the most and the least:macho

[DREWS400EX]

Originally posted by CowsBitePeople
if i found i shipping company and stuff coulfd u ship it? how much it weigh all together estamate at the most and the least:macho
I dont really know, maybe between 500 and 600 lbs. Thats just a guess.

[CowsBitePeople]

did u try forward air? think thew site is www.forwardair.com?

[DREWS400EX]

Ok, I went to forwardair.com. Its $364 :eek2: and I would have to drive over 3 hours to get to the nearest forward air.

[CowsBitePeople]

oh man ouch u wouldnt drive that far would you?lol

[DREWS400EX]

Its a little far for me since I only get 2 days off work a month.

[CowsBitePeople]

ouch i dunno what to say then :(

[Juggalo]

we have a dead warrior engine. i know its not what your lookin for since yours is dead too but if you wanna work somethin out then lemme know. if not i understand