i need to make my blaster faster

[blaster_boy1335]

I need to make my Blaster faster but i don't know what i should get could you help me? thanks in advance

[CHAUNCY]

If you want to spend a couple bills get a 240 kit. It will beat 400's:) Also, try a port and polish, and some reeds and a reed spacer:macho

[blaster_boy1335]

How much would that cost?

[CHAUNCY]

Like 250 bucks I believe without a new cylinder:ermm: That is the piston and sleeve for 250. Also if you are a kind of heavy guy go on a diet:blah: It wil make you go faster. If you dont have a pipe and silencer get both. Reeds are like 80 bucks for a ram valve. Different prices from mild to wild. A port and polish will run you anywhere from 100 to 300 depending on where you go. The sky is the limit:blah:

[blaster_boy1335]

Okay i have the toomey b1 series pipe kit and alot of other stuff done to it but i was thinking abou getting the CT 240 big bore kit for it but i don't know yet.:confused2 :blah: and i only was about 90 somthin pounds haha:blah:

[ex kid]

get the Vitos 240. its bad. make sure you get there degree key. also i would invest in a boysen rad valve. i hope you have some kind of aftermarket tires. with the 240 kit i would buy the +2 swingarm extension too. the thing will do mad wheelies.

[flyin#5]

ok, you dont need a 240 kit. you wont really gain that much from just a 240 kit. you can get very good results with a good port and polish chambering/milling the head and other motor work. check out www.trengaracing.com for more info on motor work. there is alot you can do to hop up a blaster to make them go pretty dang fast.

[blaster_boy1335]

Right now i can't get anything I am broke. I just spent all my money on stupid **** for stupid things

[CHAUNCY]

Originally posted by flyin#5
ok, you dont need a 240 kit. you wont really gain that much from just a 240 kit. you can get very good results with a good port and polish chambering/milling the head and other motor work. check out www.trengaracing.com for more info on motor work. there is alot you can do to hop up a blaster to make them go pretty dang fast.

What do you mean you dont gain that much with a 240 kit? You gain like 13+ hp's! I think thats prety good :ermm:

[blaster_boy1335]

Yeah i agree I think i am going to go with the CT 240 kit and some shocks and skidplates.:)

[sweet300ex]

Originally posted by blaster_boy1335
Yeah i agree I think i am going to go with the CT 240 kit and some shocks and skidplates.:)
done just get a 240 kit, you wont see that big of gains, well they will be there, but if you get port and polish and stuff like that it will heavily increase!

[blaster_boy1335]

Yeah i think thats what I am going to do.

[flyin#5]

thanks sweet300ex thats what i was trying to say. your going to have to get all the other motor work done for the most out of a regular 240 kit so why not do it first and get the most gains out of that? then go with the 240 for some extra kick.

[CHAUNCY]

Originally posted by flyin#5
thanks sweet300ex thats what i was trying to say. your going to have to get all the other motor work done for the most out of a regular 240 kit so why not do it first and get the most gains out of that? then go with the 240 for some extra kick.

Ohh, I get what you were saying now. Sorry for snapping;) If you mod your engine right--- port and polish, mill the head, etc... you can prolly get 15-20+ hp with the 240 kit. But with this you might also want to look into shocks, a-arms, and an axle because suspension will really make you better and faster rider, blasterboy;)

[ex kid]

the ct motor will be great. like everyone else said and i forgot get it ported and polished. for the handling department a arms and a swingarm are to much money. i would get a set of douglas offset rims with works shocks unless you on an mx track all the time them deff get a arms and an axle. stay away from wheel spacers!!!!!

[Flyin#3-1/2]

Originally posted by blaster_boy1335
I need to make my Blaster faster

put a banshee engine it:devil:

i always wanted to do that....i should steal my friend's blaster frame while it's sitting in his garage in pieces:D

[blaster_boy1335]

Thanks for all the help guys I already have offset rims and I need to get new ones because we have a MX track at our house that DAve400ex and I ride on;)