PDA

View Full Version : Valve clearnces..


frogburner
08-16-2003, 05:41 AM
hey yall,,
I have the HOTCAM stage 1 and forgot what the best clearance was,, can ya help me out..
PHIL_B54
08-16-2003, 05:57 AM
"Rotate the crankshaft to open the exhaust valves to their furthest openings (this ensures that the cam lobes for the intakes are on their base circles) and set the intake valves’ clearances to .004” (inch). Rotate the crankshaft to get the intake valves at their furthest openings and set the exhaust valves’ clearances to .006” (inch). Rotate the engine slowly several revolutions. Install the tappet covers. Install the spark plug. Install the engine breather tube to fitting on the top of the cylinder head cover. Install the timing hole cover and the crankshaft cover."

got it from

http://www.hotcamsinc.com/instructions.asp click 400ex