Brakes-No Pressure [Archive] - ATV Riders Forum

jwisniew

08-12-2003, 02:13 PM

alright well i changed my brake pads and i noticed that the brakes were kinda weak so i decided to bleed them. I bleeded one caliper alright but when i got to the other one nothing would come out. I then noticed brake fluid dripping out of the hose right by the caliper. I took it off and put it back on and now nothing happens at all and there is no pressure on the brake lever?

jwisniew

08-13-2003, 04:40 AM

anyone have a clue?:confused:

thumpa6x

08-13-2003, 05:05 AM

you might want to put fluid in the resivor. but now you have made it 1000000 times worse lol you let alot of air into the lines...
i take it you are working on the fronts. bleed the right side 5 times the then left 5 times and so on. but always check the fluid in the res. keep filling it you will use it

thumpa6x

08-13-2003, 05:08 AM

oh yes and it will take a pretty long time to do them b/c you unbolted the main line:ermm: lol

jay's 300

08-13-2003, 05:25 AM

Thanks, I was wondering the same thing! :D

jwisniew

08-13-2003, 07:01 AM

k thanks, ill take it to a mechanic with a special vacuum