What psi in Kenda Klaw MX's?

[Ty's400]

Hi I was just wondering what P.S.I. you ran in your tires? Preferably Kenda Klaw MX's because that is the kind I run. thanks

I run 10-12 in the front and 6 in the rear...:macho

[300EXrider02]

how about with a 8" or 9" rim, it should be different for the rear right?

[Ty's400]

Rico you run that much? What rims do you have? I have the fronts on .190s and the rears on 8in. OMF beadlocks. I only run like 4 psi in the front and 3.5 in the rear? Is that way to low? I thought that the tires said on them recommended pressure no higher than 5? Please help me out, because I might have way to low of pressure. thanks

[Fuchs42]

i run 20 (not bsing either) on 9 inch rims

[Colby@C&DRacing]

I run 10 psi in the fronts and 6 to 10 in the rear depending on track conditions

Originally posted by Ty's400
Rico you run that much? What rims do you have?

I run douglas .190's..the rears have the rings welded in but the fronts are just normal .190's. I run so much in the front because anything less than 8lbs your takin a chance of puttin flat spots in your rims from landing jumps. The rears i like to keep at 6 minimum to keep the tire from poppin off the bead for one and I like to slide in the turns more than having the tire grab and throw me off the side...:mad:

[400EXrider#91]

Originally posted by Rico
I run douglas .190's..the rears have the rings welded in but the fronts are just normal .190's. I run so much in the front because anything less than 8lbs your takin a chance of puttin flat spots in your rims from landing jumps. The rears i like to keep at 6 minimum to keep the tire from poppin off the bead for one and I like to slide in the turns more than having the tire grab and throw me off the side...:mad:

so i'm guessing thats why my rims are flat spoted?

Originally posted by 400EXrider#91
so i'm guessing thats why my rims are flat spoted?


;)

[400EXrider#91]

also rico, thanks for the tip for the stearing stem. it alot better;)

Originally posted by 400EXrider#91
also rico, thanks for the tip for the stearing stem. it alot better;)

That's what pappy said.......:D Your welcome...:blah: