need a little help

[pineway]

I am in the middle of putting the 400ex front end on a 300 and i dont know how i should adjust the tie rods. just wondering what you guys did who did this.

[4TraxRider]

I used stock 400EX ones, and everything worked fine on my brother's.

[Fuchs42]

ive got all stock 400ex stuff on mine

[300exOH]

I screwed the tie rod ends on to the rod and counted the turns for each to make sure you have them both the same. I started with like 8 or 10 turns. Then just bolt them on and take measurements to adjust the proper toe. I ended up setting it up with no toe(meaning equal distance at the front and rear of the tire). It seems less twitchy with no toe in. Hope this makes sense. Good luck.

[Diedrich]

Originally posted by 300exOH
I screwed the tie rod ends on to the rod and counted the turns for each to make sure you have them both the same. I started with like 8 or 10 turns. Then just bolt them on and take measurements to adjust the proper toe.


thats how i done mine..works good

[pineway]

thanks for the help