PDA

View Full Version : 2000 Lonestar K&T Performance Honda Drag Bike FOR SALE!



BIGDROCH
08-05-2003, 11:10 AM
http://www.planetsand.com/memberphotos/76504-Drag%20Bike%20Sale%20Pics%20009.jpg

This is COMPLETE LONESTAR RACING DRAG BIKE with a polished Alcohol fueled K&T Performance Full Race Ported 350cc Pro-x cylinder'd drag racing motor. This cylinder has been welded in the back to allow for more side wall porting and to prevent from cracking. This beautiful MOTOR IS COMPLETELY POLISHED from the top to the bottom. This bike ready to race weighs UNDER 230lbs! The 1986 bottom end is equipped with a 2-4 override transmission (still has 1-6 gears), Hinson clutch basket, Custom Clutch hookup spring kit, 1989 needle bearing pressure plate update, a custom built & ported CR500 Rad Valve reed cage, brand new 78.5mm piston, Inter-changable Alcohol Racing dome, 86 short rod crank, a Racing PVL Ignition, FTZ high rev drag pipe, and your choice of a 40.5mm FTZ Alcohol Carb or a 41mm Lectron carb setup by Dennis Packard. The chassis, is a complete lonestar roller. Has Banshee hubs front and back. All chrome front a-arms, Tie rods, spindals, handle bar clamp, and Steering stem. Chrome +10 aero tube swingarm in excellent condition with a Lonestar billet carrier and a -6" lonestar billet drag axle. SuperLite Front rims and tires with cut out rims, 23" 74 R.O. Triple buff superlite 10 paddle haulers in the rear. Beautifully painted fenders, brand new headlight assembly, brand new black velvet seat cover, and brand new freshly powdercoated gloss black chassis. This bike has beaten 95% of every 350cc, 370cc - 410cc Honda Pro-x cylindered bikes it's raced and it's reliable!! Can be easily converted to Race gas. Email me for more info. Bike has not been ran since the fenders were purchased, frame was powdercoated, and the seat was recovered, all never used. Piston has yet to be broken in. The Frame has additional support to prevent from cracking. Next thing to Brand New with over 16k invested only asking 7900 OBO. 7500 w/o Painted fenders. 5,500 w/o motor and fenders. Bigdroch@aol.com

Derek

Additional Pictures Below........

http://www.planetsand.com/memberphotos/76495-Drag%20Bike%20Sale%20Pics%20001.jpg

http://www.planetsand.com/memberphotos/76498-Drag%20Bike%20Sale%20Pics%20003.jpg

http://www.planetsand.com/memberphotos/76499-Drag%20Bike%20Sale%20Pics%20004.jpg

http://www.planetsand.com/memberphotos/76500-Drag%20Bike%20Sale%20Pics%20005.jpg

http://www.planetsand.com/memberphotos/76501-Drag%20Bike%20Sale%20Pics%20006.jpg

http://www.planetsand.com/memberphotos/76502-Drag%20Bike%20Sale%20Pics%20007.jpg

http://www.planetsand.com/memberphotos/76503-Drag%20Bike%20Sale%20Pics%20008.jpg

http://www.planetsand.com/memberphotos/76504-Drag%20Bike%20Sale%20Pics%20009.jpg

http://www.planetsand.com/memberphotos/76505-Drag%20Bike%20Sale%20Pics%20011.jpg

http://www.planetsand.com/memberphotos/76506-Drag%20Bike%20Sale%20Pics%20012.jpg

http://www.planetsand.com/memberphotos/76507-Drag%20Bike%20Sale%20Pics%20013.jpg

http://www.planetsand.com/memberphotos/76509-Drag%20Bike%20Sale%20Pics%20014.jpg

CowsBitePeople
08-05-2003, 11:22 AM
wasnt this on ebay??

BIGDROCH
08-05-2003, 11:36 AM
That's a Negative........

Atreyu
08-05-2003, 01:33 PM
It was on ATV Trader ;)

CowsBitePeople
08-05-2003, 01:33 PM
Originally posted by Atreyu
It was on ATV Trader ;)

Thats right i knew i saw it some where :cool:

Glamis400ex
08-05-2003, 04:35 PM
Nice dragger buddy...free bump

Glamis

BIGDROCH
08-05-2003, 07:48 PM
Thanks Homie,

Find somebody to buy it from me!! haha