RUNMYTA
08-05-2003, 01:13 AM
I know this sounds stupid but tell me what you think!! :eek2: This weekend I found that I had the stator side crank seal leaking. I had the seal replaced and the bearing was tight and in excellent shape!! Case is less than 6 months old. What would cause this?
OK, here is what doesn't make sence??::confused:
After changing the "stock cylinder" with a LRD 300 kit I only had to go up 1 size on the main (per ESR). Well I wasn't totally happy with the plug color so I decided to go 1 more size (36mm TMX with 390 main). At first it still popped and missed at high RPM even though the plug looked good!! *** The kicker::: I run the air screw out from 3/4 out to 2 1/2 turns out and she runs like a raped ape again!! No misses or pops, idles fine and is smooth all across the power band. If I am right and I am positive that I am. BY turning the air screw out I leaned out the air/fuel across the entire power band... Shouldn't this have made it run worse?? I even put the air lid on and it would not run at all (popped and missed from idle up) SO I took the lid back off ran it and did another plug chop and the Plug still looks good but this just doesn't make sence:ermm: Do you think I am just covering up another problem somewhere or am I just over reacting?? Later,MIKE
OK, here is what doesn't make sence??::confused:
After changing the "stock cylinder" with a LRD 300 kit I only had to go up 1 size on the main (per ESR). Well I wasn't totally happy with the plug color so I decided to go 1 more size (36mm TMX with 390 main). At first it still popped and missed at high RPM even though the plug looked good!! *** The kicker::: I run the air screw out from 3/4 out to 2 1/2 turns out and she runs like a raped ape again!! No misses or pops, idles fine and is smooth all across the power band. If I am right and I am positive that I am. BY turning the air screw out I leaned out the air/fuel across the entire power band... Shouldn't this have made it run worse?? I even put the air lid on and it would not run at all (popped and missed from idle up) SO I took the lid back off ran it and did another plug chop and the Plug still looks good but this just doesn't make sence:ermm: Do you think I am just covering up another problem somewhere or am I just over reacting?? Later,MIKE