Clutch problem

[go_chrisg]

ok well just today i changed my handlebar....i took everything off and put everything back on and anyways.....when i went to pull the clutch in(the bike was in gear) and push it, the bike wouldnt move.I tried adjusting it at the lever and now the bike will move but i can feel the bit of lag so that means the clutch is still not fully engaged.....so is there any suggestions?

[Stevie-D]

follow your clutch cable down to the right ( clutch) side of your engine. there is a bracket that holds the cable near the top of the clutch. it can be adjusted by loosening a few nuts.( 11 or 12 millimeter) then make sure you crank em back down tight when your done;)

adjust it down by the engine???

[Chanman420q]

Originally posted by Crazy400exMan
adjust it down by the engine???

yes there are 2 adjustments, at the clutch perch and at the clutch cover

[go_chrisg]

i see the adjustment by the engine but i dont understand how it works....there is two sides that can be adjusted....do i do both?