shaving fenders

[300exlunatic]

how do ou shave the fenders on a 300ex directions examples pictures

[Pvt. Maggot]

i got a few pics of mine....you can message me at Acoldlonelydeath on aim for pics...

[GT300]

I recently cut mine and I think that they look awesome. Sorry I don't have any pics. I used a jig saw to cut it then sanded down the edges.

[stiffy]

Do a Search there has been tons of threads on this subject.

[killer03_300ex]

what i did is drew outlines on my plastics with washable marker and took a look then cut the lines with a jig saw then took a razor blade to cut out any of the edges and then sanded it down
come out pretty nice ill try to get pics

killer03 is prob. the easiest way to do it...thats the way i'll do it after my nerf bars come in

[300exOH]

I used masking tape to make a line and cut it with a jig saw since my fenders are black. Then I used a file to smooth it out.

[300exlunatic]

is it easy to mess up can you use a swazall

[ny300exrider]

Originally posted by 300exOH
I used masking tape to make a line and cut it with a jig saw since my fenders are black. Then I used a file to smooth it out.

[suck my pipe]

use Black electrical tape, since it gives a little side to side, you can make smoother bends were it comes down by your legs. Use a jigsaw, yes you can mess up so be carefull, then just sand them down nice. it's pretty easy.