PDA

View Full Version : shaving fenders


300exlunatic
07-31-2003, 02:20 PM
how do ou shave the fenders on a 300ex directions examples pictures
Pvt. Maggot
07-31-2003, 02:32 PM
i got a few pics of mine....you can message me at Acoldlonelydeath on aim for pics...
GT300
08-01-2003, 04:59 AM
I recently cut mine and I think that they look awesome. Sorry I don't have any pics. I used a jig saw to cut it then sanded down the edges.
stiffy
08-01-2003, 06:37 AM
Do a Search there has been tons of threads on this subject.
killer03_300ex
08-01-2003, 08:13 AM
what i did is drew outlines on my plastics with washable marker and took a look then cut the lines with a jig saw then took a razor blade to cut out any of the edges and then sanded it down
come out pretty nice ill try to get pics
08-01-2003, 08:27 AM
killer03 is prob. the easiest way to do it...thats the way i'll do it after my nerf bars come in
300exOH
08-01-2003, 08:31 AM
I used masking tape to make a line and cut it with a jig saw since my fenders are black. Then I used a file to smooth it out.
300exlunatic
08-01-2003, 09:41 AM
is it easy to mess up can you use a swazall
ny300exrider
08-01-2003, 11:22 AM
Originally posted by 300exOH
I used masking tape to make a line and cut it with a jig saw since my fenders are black. Then I used a file to smooth it out.
suck my pipe
08-01-2003, 11:40 AM
use Black electrical tape, since it gives a little side to side, you can make smoother bends were it comes down by your legs. Use a jigsaw, yes you can mess up so be carefull, then just sand them down nice. it's pretty easy.