PDA

View Full Version : Uni Filter Question



2001EX
07-31-2003, 12:26 PM
Is the uni filter for the 400ex a two piece that's taken apart for cleaning or is it one piece? I bought a used 400 and the filter that's on it now is a foam filter. It's red on the outside and yellow on the inside, but doesn't come apart for cleaning and there is a wire culinder that slides out of the filter. It doesn't say uni on it.

Pappy
07-31-2003, 12:28 PM
my uni's have the wire mesh inner screen thats removable

Chanman420q
07-31-2003, 12:40 PM
mine says UNI on it

breadman400ex
07-31-2003, 01:16 PM
I would say that it is prolly a uni... and the word uni just wore off from cleanings etc... cuz my uni filter is red on the outside and yellow on the inside....

2001EX
07-31-2003, 03:18 PM
thanks for the replies

MOFO
08-01-2003, 12:02 AM
It sounds like a Uni. If so, it does not come apart (yellow foam and red stuff). As pappy pointed out, there is a wire mesh that should be with it.....this does come out.

Dirt
08-01-2003, 05:04 AM
Stock is yellow outer and grey inner with a basket/wire mesh under it.

Woodsrider
08-10-2003, 01:46 PM
Does it have a black rubber thing on the back of it, to slip over a nipple on the wire cage? If so it is not a uni. UNIs are longer than the OEM filter and dont have any thing on the back side. A WB filter on the other hand, is the sane length as the OEM filter and uses the OEM basket. Hence the rubber thing on the back of it.