so whats your plans?

[Pappy]

so whats everyones plans for this winters rebuilds or new quad purchases?


so far im on track to complete atleast 2 complete R rebuilds and probably redo my stock 400.....and rebuild my 425 into a stroker.

anyone else?

[Brad]

trinity professional 440:blah:

elkas with piggybacked rezzies and camo shock covers, im thinkin burgard a arms, and hipers, also lots of powdercoating stuff trans blue

[Taco]

drink beer, take apart 400, put together 400 ummmm thats about it:D

[400exBro]

yzf 426 in my ex frame, with Elka lt shocks all around... (yes pappy i decide to go with elka and see how i like them before i say anything... plus i am getting a good deal) if the time and money is right, it will be done...

[Pappy]

Originally posted by 400exBro
yzf 426 in my ex frame, with Elka lt shocks all around... (yes pappy i decide to go with elka and see how i like them before i say anything...

cool...jeff has a set of LT ohlins i will be trying out soon:D

[Flyin#3-1/2]

i plan on either buying a cheap 400ex and modding it out all the way this year...or saving up my money and going with a yfz450 next year, or wait for honda if anything good shows this year...but first i have to pay off my debt to my parents for the repair bill to my banshee....damn 2-strokes...:grr: ..well, more like damn yamaha...:mad:

[KrazyKid300ex]

make some money.... hopefully buy some burguards and axle. need some powder coating i know this won't be winter stuff but they are plans for my ride:

burgard +2's
revalve stock shocks or PEP or elkas
Lsr axle
Razr Mx's on beadsfor rear
Razr MX's on billet rolled edge for front
Bars,Handguards
Ac propegs

[Flyin#3-1/2]

also my dad and i got a 400 twin street bike engine that we're putting in quad engine and i was thinking about putting it in a 400ex frame. what do you guys think about that?

[UglyMotha™]

well right now my plans are a set of silver plastic thanks to popo (:blah: i'm just giving ya a hard time) and a new set of front a-arms front rims and tires and a hydraulic clutch and i was goin to chrome my side cases and put on a xr400 clutch side case with the hinson cover and a a crf450 timing chain that's all i have planned for now

[knighttime]

1. powdercoat frame/ PPC
2. new a-arms
3. get carb swirl job
4. port n polish head?
6. put braided sst line on the hyd. clutch
7. axle?

thats about it for me:D :bandit:

I"m gonna race the mofo all winter...:devil:





I'll also probably do a little landscaping with my quad. I tend to remove small tree's or relocate them while racing...:mad:

[TheChknhwk]

IT'S TOO DAM EARLY TO THINK ABOUT WINTER!!!! There are 3 good months of riding left here:D I do need a belly skid tho;) For when I get too drunk at the campfire & fall out, lol:devil:

[300exOH]

I'm thinking about putting blue fullbore on the front of my 300 and doing some red white and blue pc work. I'd also like to extend my swingarm an inch or 2 and a Works shock for the rear.:cool:

[sweet300ex]

i think me and my dad will get a cheap, old, dirtbike or small quadthats in rough shape and restore it

[bansheeguy77]

Originally posted by sweet300ex
i think me and my dad will get a cheap, old, dirtbike or small quadthats in rough shape and restore it

i have exactly what your looking for if ur interested

[Cody_300ex]

eathier put a 350X engine in my 300ex frame, or put a 11:1 and a webcam in. And polish parts!:cool:

[spincr4hire]

I plan on breaking down my Z, getting it gusseted and pc'd, and a few other minor things. Hopefully a new swingarm, shocks, etc this fall.

Hows this for a change.

Ride the darn MOFO.

:D :devil: :macho

[XANDADA]

Various odds and ends for the R (unless Honda introduces something amazing then these are all on hold while I add a 4 stroke to the toy collection:devil: ):

Chrome my JB Racing a-arms & swingarm
Shock rebuild/revalve
Houser chrome stem
Tag bars
hand guards
Top end rebuild or sell the 265 and trade up to the 310
Shamrock Beads w/ razr's
Front Baldwin Hubs
PC/chrome a few more items

[bradley300]

right now its getting

new rear plastic
gthunder 350 big bore
high lift cam
heavy duty valve springs
full race porting
new clutch
black cycra plastic for the handgaurds(ditching the red)

beforethe 04 gncc it will have

hydro clutch
hipers for the rear
front rezzies for my elka's
possibly some brake system mods.

who knows what else!

[wilkin250r]

Complete rebuild on my 250x, including pc the frame, new plastics, powroll 350x conversion, and the NITROUS :devil:

[trueblue450]

get my new yfz........ and hopefully make some money to put
nerfs, skids, handlebars
ya know..!

[Bill Fuller]

Get the Dale ready for domination of the MSWS Vet class.:macho Send shocks to Quadshop for SSD conversion,add a dampener,New tires and hopefully some Hipers all the way around.I did say dominate didn't I?:D :muscle:

[KrazyKid300ex]

yea i want propegs for my yfz and they are 289! from AC directly

[cheetah]

Well if Honda doesn't release a new quad that is better than the YFZ, I might look into an R.:cool: I've been dying to get an R and fix it up to my liking. If that falls through then I'll probably just get some white fullbore and powdercoat. Possibly some axles and a-arms too. But I'll still have a friggin stock engine.:cuss:

[Tommy 17]

well if all goes as planed with me...


i'll be salin parts off the 406... gettin a job and doin this to my 50...


all orange frame
orange plastic
custom seat wtih tommy stiched into it
118cc big bore stroker kit:eek2:
lahaye racing 10.5 inch travel rear end...
not sure on the forks yet...


i plan on puttin over 2,500$ into my 50 for next race season:macho

Originally posted by Bill Fuller
I did say dominate didn't I?:D :muscle:


Guess i better start conditioning...:o

[flyin#5]

take apart the blaster.... rebuild if nessicary, then mill my head maybe a port and polish.

[ex kid]

taking my bike apart, looking for anything that can be fixed or painted. adding some accesories and making sure its as ready as can be for next years hare scramble series and possibly the GNCC at raush creek. then im gonna ride in the cold.

[dirtmomma]

OUr plans for this winter.......race,race,race.......build our 600 flattracker for next summer/winter :blah: that is if things go well finding parts.

[Atreyu]

Hopefully all this stuff will be done before winter but LSR axle, Beadlocks all around, Frame redone, J-Arm conv., A-arms, and possibly a top end rebuild.

[Glow Plug]

I might repeat might. Strip the bayou down just to get out all the 3 year old mud lol :rolleyes:

[EXracer8604]

My plans are:
1. LSR +4 axle
2. Bugard +2 a-arms
3. PEP Triple Rates w/ rezzies
4. New Yellow OEM Plastic and 02 Black seat
5. YZ blue frame
6. Kenda Klaw MX on all four

[soul]

well i couldnt wait till winter i had the cash now so im going for it and its driving me nutzzz...the frame is transparent red powdercoating and im goin silver plastic and custom axis front and rear shocks and + 2 everything and +1 swing arm and the motor will be done in the winter:devil:

[hessianmx111]

if i still have the kx by winter, which is very doubtful. im going to

-new tag t2 handlebars and universal mounts
-black pced frame
-suspension revalved.
-swing arm pced either black or hammertone grey
-pro circuit graphics

but ill prolly have a brand new yzf or crf250 by then and just put tag t2's and a slip on fmf exhaust:devil:

and ill prolly have a 400ex then too and ill just put a slip on on it if it doesnt have one but ill prolly just get misc parts pced. and ride it all winter:)

[K_Fulk]

Building a bigger pc oven, get a better gun.
For the quad re- powdercoat the frame and get it gusseted. And powdercoatin some other stuff on it.

[WalshKFX]

my plans are to gett burgard +2 a-arms, lsr axle, douglas billet wheels, burgard or douglas rear beadlocks, new plastics, hmf slip-on, holeshot mx's, and lots of pc'd stuff by pappy

[KrazyKid300ex]

what are you going to do with my razrs?

[trx400ex]

Well ive already built one of the baddest 400exs, and now that its mostly gone,im gonna build the baddest YFZ:devil:

[nightrider05]

If everything works out im gonna get a 1991 lt250r and will probably spend some time fixing it up the rest of the way.-Jason

[cody anderson]

i plan on racing my 250and 450 thats about it...

[knighttime]

what r u doin this winter:confused: :eek2:

[user101]

get my shocks rebuilt and rezzies added to the fronts. maybe an axle, all the usual stuff (ex. bearings, brake pads, chain and sprockets) check my frame for cracks and might get it powdrcoated, lrd exhaust for sure, and might get some hipers if i can get a good deal.

i couldnt wait till winter to order the plastic and graphics kit so im gonna order it next week.

[YamaWarr0121]

shocks are going to go to TCS or quadshop for SSD/Zero pReload revalving, respringing..subframe pc, carbon fiber stuff :eek2: tag t-2 bars and clamps, wave brake rotors, and maybe some other fun stuff

should be running awesoem for when i turn 16:D

[hondafox440]

I think I am going to completely tear down the 125 and blueprint the cases, and maybe do a fork/shock rebuild. Just did the top end last night, so thats fine.

As for the 440, who knows. Maybe suspension.

[JabberJaw]

I'm planning on sleeping through the winter!

[CUZ'n]

i tink we guna polish my sportr and mayb get some new bags dat don smell like stufff an mayb we paintcoat monkeys tekotty reel goode an mak it reel fass like johny c

[MOFO]

Well, I agree with Taco... basically drink beer and take my 400ex down to nothin. Powdercoat frame and parts, get me some suspension and maybe play with the motor. :D

[anywhereEx]

Have no clue:confused2

Chances are tear stuff up and have a few quads/bikes apart in the shop.

Originally posted by Pappy
so whats everyones plans for this winters rebuilds or new quad purchases?


so far im on track to complete atleast 2 complete R rebuilds and probably redo my stock 400.....and rebuild my 425 into a stroker.

anyone else?




well i been thinking alot and this sounds the best


buy a 01 yzf 426

take everything i need out

have a new oem frame modded for the motor by christian paul motorsports and have him go through the yzf motor

throw the motor in and do these mods to my ex

elka triple rate comp adjust
oem frame
new plastic
duncan graphics
new sprockets
new skid plates
new brakes
rear brake line
lsr rear hubs
moose shifter
filter skins and filter
elka rear conversion
houser steering stem
tag t2 bars
denton steering damper
subframe and ac grab bar
ac racing stadium bumper


i was thinking about just building up my motor and a arens frame but my motor is 4 years old and it still wouldnt be as fast as a yzf....ahh sheet i dunno whatr to do

[Chanman420q]

a-arms axle, rear shock, and get some hypers....... thats about it...... unless i come across more money;)

[TheRedRebel17]

get rid of the quad and get a cr/lx/yz 125, and clean it up, and maybe something like a pipe and silencer, graphics, bars, piston, and some other stuff if it doesnt have it on it...if it does,and teh compression is fine. then i might do a fork/shock rebuild:ermm:

[Rip_Tear]

Things that I most likely will do (almost for sure! :D)
1. Gusset the frame
2. Tear it right down
3. Skid Plates (swingarm probaly sooner then winter) Protect swingarm not sure about the body...
4. A pipe....(who knows at this point!)
5. Grease and oil everything (after I clean it!)

Things I would like to do:
1. Powder coat the frame and various parts
2. Get the rear shock rebuilt (not sure who by, but Pappy's suspension thread got me thinking about this one!)
3. Front Piggy Back Elka's
4. New plastics and Graphics
5. New tires and rims (Razr's, not sure what rims...)
6. New bumper (AC) and Bars (not sure)

Its going to be hard to do all this from college, LMAO! There's likely more, but I won't get too out of hand, I have no ATV money! :(

[nacs400ex]

Sell the 400ex, MOD OUT THE R :D, and start building a crf450 quad, or yzf426.

Rip_Tear, I am gunna have my Elkas on the R until I have enough money for some LT's, If you want some Elkas I will have some for sale before spring time. :)

[nacs400ex]

oh yeah, and if your at the college this fall, your coming to Rjs on wednesday nights. I want to ride with quads instead of dirtbikes. Adam Parks is out with a broken back until next year... so ya. Oh well.

[CBW]

Well i have on order a BLUE yfz450,,,(will be in the end of august),,,,,,,i plan on PC'in the frame black like my 310, adding a pipe and jet kit, different bars, getting black beadlocks and mx tires, and PC'in the shock springs blue to match the plastic.....and polishing what ever motor cases i can.....and PC'in the rest.......


Or something like that........:huh

[Pvt. Maggot]

Well....heres the plan...

1. Get the xr500 motor in....make mounts ect if needed...either paint the frame or get it pced..

2. Order my works. fronts for now have them set up for the 400ex +2 a-arms...rear soon

3. Make my bros stock 400 pipe fit the xr untill i can save up for the duals..

4. Order rear tamers on douglas 190s.

5 Order nerfs and other parts and send a few things to pappy.

Maybe a few other things here and there...:devil:

[WalshKFX]

what are you going to do with my razrs?


if i need new tires im gonna get holeshots. until then im gonna run my razrs:cool:

[bluebaron]

ummm, lets see, have money to buy pipe, and not break stuff while river riden

[4wheelboy]

ok all the money is going into the 50
1 bbr bar kit
2 applied racing rear shock
3 applied racing front fork springs
4 bbr 82cc big bore kit with cam or biger?
5. lift kit
6. ?????? we will have to see:devil: :eek2:

[Butters]

trying to figure out how i can get a better quad.

[QuadJunkies]

Mie is going to be a 440 in the spring since I will race most of the winter months, Pc, new nerfs, and beefin up the Mini quad (Bore kit) for the lil missy.......:D

[popo]

Originally posted by bradley300
right now its getting

new rear plastic
gthunder 350 big bore
high lift cam
heavy duty valve springs
full race porting
new clutch
black cycra plastic for the handgaurds(ditching the red)

beforethe 04 gncc it will have

hydro clutch
hipers for the rear
front rezzies for my elka's
possibly some brake system mods.

who knows what else!

How about a compass and an airbag so you don't go off cliffs.

[TC17]

selling the 300 now. getting my dad's 400 in a few weeks. for christmas, shocks, pipe, maybe a few other things. but right now, my parents are getting a loan to build me a track if i stop racing. so i'm going to get Tommy, Derek, 250X93, RacerX, and a few otehr guys to come party/ride at my place.
:cool: i'm really excited.

[Martin Blair]

im spending about 2500 bucks not much but it should be alot better after this winter heres a list

TCS RACE SERIES WITH COMP REZZYS $ 680

TCS SCS REBUILD $ 340

PRM SKIDS $ 165

AC RACING BUMPER $ 60

MAIER FRONT BLACK REAR RED PLASTIC $ 232

CRF 450 KEHIN 40MM FLAT SIDED CARB FROM SERVICE HONDA
$375

JE 416 10.6:1 KIT AND HOTCAMS STAGE 2 PLUS 416 BORE $ 300

mybe a bit more, should i get some burgard a-arms instead of a 416 kit?

and i am getitng some razor 2 rears.I might get some burgard plus 1 a arms instead of the 416 what you think a arms or 416? i will still get the fcr carb if i get the arms.

[TheChknhwk]

I'll start saying what I'm going to do when I can affort to put my money where my mouth is:bandit: :bandit:

Originally posted by popo
How about a compass and an airbag so you don't go off cliffs.


And you some new contacts or riding goggles.... After all you tried to follow him popo....:o

[Bill Fuller]

^^^SHOOT him Popo,shoot him then arrest him^^^:devil:

[dirtmomma]

Originally posted by Pvt. Maggot
Well....heres the plan...

1. Get the xr500 motor in....make mounts ect if needed...either paint the frame or get it pced..

2. Order my works. fronts for now have them set up for the 400ex +2 a-arms...rear soon

3. Make my bros stock 400 pipe fit the xr untill i can save up for the duals..

4. Order rear tamers on douglas 190s.

5 Order nerfs and other parts and send a few things to pappy.

Maybe a few other things here and there...:devil:

What kind of frame are you putting the 500 in?? We're getiing ready to put a 600 in either a 400ex or 250r frame!! Momma's gettin a new racer yeah baby!! Good luck on your project!!:)

[bradley300]

well popo, i'll just ride behind you that way next time you hit a tree, or some ugly motha, i got a pretty zuke to bounce off of instead of rolling down the mountain.:devil:

[UglyMotha™]

Originally posted by bradley300
well popo, i'll just ride behind you that way next time you hit a tree, or some ugly motha, i got a pretty zuke to bounce off of instead of rolling down the mountain.:devil:



LMAO i don't think it was safe to ride behind OR IN FRONT OF popo :eek2:

[ridinashee]

I'm going to rip my banshee apart n put it in a newer frame ... then im goin to buy +2 a arms and w/e else shee needs mabe handlebars .. etc.

[monkeyboy]

fixx daa handebarz an weeel pole :scary:

[Martin Blair]

so what you gusy thinks a arms and swingarm or 416?

[toby400ex]

Try to just afford replacement parts for the quad, maybe get the frame all done up, that is if i dont end up with huge truck payments, expensive insurance, and bad gas mileage. This winter doesnt sound fun so far, and its like 4 months away.:o

[toby400ex]

WELL.......right now it looks like im in good fortune. Since i now have a good buddy that will powdercoat ma frame purdy colors for cheap. New bumpers and tires on the way. Im not sure it is a rebuild but it wont look as crappy when it is done.:blah:

[Ex_Rider43]

rebuilding it as a 425 in february or march but justin's +2 Burguards and a lonestar axle ( used if I can find one ) will be in just in time for christmas.

since we got a rainy, ugly and whatever it was summer.. I will be riding my 400 in the trails this winter, yes with the big pro wegdes at -30 outside.

[dirtmomma]

Well I've started on a little "project" w/ my 300.....we're "freshening" it up a little w/ a new piston,rings,ect. I've got new rear tires & rims for it, got some new front grooved radials on some offset rims, I sanded all my plastics down smooth(can't afford new ones:( ) and am clear coating them, they actually turned out nice:eek: , putting some new "graphics" on, & am thinking about changing my nerf nets, they are rivited on so it could be a pain though!! I think the 300 is gonna look good once it's all done & I'm SURE it'll run MUCH better!!:devil: :devil:

As for the 600 flattracker it's on hold until we find someone to copy a 250r frame in aluminum for my bro in law so we can have the old frame, may have a lead on someone just have to get ahold of them. But we have purchased, Aarms,shocks,motor w/ pipe,carbs, we have tires/wheels & a swingarm. Our next purchase needs to be hubs & spindles, brakes,levers, ect. then we will get into the plastic,seat, ect.

I'll have to post some pics of the 300 when it's all back together & done I thinkit's gonna look really nice:D I hope anyway LOL

[400exmom]

well i gotta buy one boy a cr 85 the other boys gettin the xr100 handed down and the leftover xr70 is gettin tore down and re-done to be my new play toy...hopefully the 400 can take one more year of racin, its a ****** tryin to keep up w/ this chit on my own

[dirtmomma]

Originally posted by 400exmom
well i gotta buy one boy a cr 85 the other boys gettin the xr100 handed down and the leftover xr70 is gettin tore down and re-done to be my new play toy...hopefully the 400 can take one more year of racin, its a ****** tryin to keep up w/ this chit on my own
But hey CUDOS to you for doing it Kim I think it's AWESOME!!! YOU GO GIRL:p
BTW do your boys race?? How old are they?? I got a 13 & 4 yr old boys, the 4 yr old is starting racing this season, & the 13 yr old this is his 4th season:eek: wow time flies seems like he just started!!

[400exmom]

Originally posted by dirtmomma
But hey CUDOS to you for doing it Kim I think it's AWESOME!!! YOU GO GIRL:p
BTW do your boys race?? How old are they?? I got a 13 & 4 yr old boys, the 4 yr old is starting racing this season, & the 13 yr old this is his 4th season:eek: wow time flies seems like he just started!! guy is 11 seth is 9 im ready to sell both thier toys cuz i have to beg them to go ridin:mad: but everytime i mention sellin um they freak on me..seth has race once and has no desire to do it again...think the hospital might have switch babies on me:confused: :confused:

I might send my lower A-arms to Pappy for a fresh PC job in black,,,besides that I plan on beatin the Chit out of it all winter at the Midsouth winter harescrambles......:devil:

[Doibugu2]

Originally posted by 400exmom
guy is 11 seth is 9 im ready to sell both thier toys cuz i have to beg them to go ridin:mad: but everytime i mention sellin um they freak on me..seth has race once and has no desire to do it again...think the hospital might have switch babies on me:confused: :confused:


I think they are just mad because there mom is a better rider!

[400exmom]

Originally posted by Doibugu2
I think they are just mad because there mom is a better rider! actually doug the think mom sux cuz i ride on 4 wheels and not 2 like them- i rode the 100 right into a tree last year and bent the fork 30 degree's DOH!! darn twist throttles&treez

[QuadJunkies]

Originally posted by Doibugu2
I think they are just mad because there mom is a better rider! I would have to agree!!!!:p

[ridered86]

complete frame strip, powder coat, gusset, and re weld that broken frame mount. piston rings, hardface my rockers deck the head, curtis sparks x-6 and an fcr...and probably alot more:rolleyes:

[JTRtrx250r]

my game plan is to find a straight R frame..if thats possible..on the west coast..w/o being bent over w/ a high price,so far ...no luck:( :rolleyes:

[Tommy 17]

red frame
orange plastic
orange a-arms subby swing arm

same for the 50 with a 118 kit and new suspension...


yes orange and red at the team colors i have to run at 50 races... so i'll just make my quad look the same... theres a sweet 250r like this in the one atv mag and it looks good... plus noone else has it that i know of...


i also need clutches, tie rod ends, shock rebuilt, front brake pads... and a few other lil things...

[roostin_dale]

Im gunna leave my dale as it is and maybe a red houser swingarm.

The 250x has a fresh curtis Sparks engine so i dont need anything there.

I will:
PC the frame Blue
PC a-arms black
PC swingarm black
Polish side cases
Quadtech seat cover
New rear plastics(white maier..400ex)
Hiper Wheels..blue rings(ordered)
RAZR mx tires(ordered)
Pro Design Kill Switch..blue(ordered)
Renthal Sprockets(ordered)
Parts Unlimited Chain(ordered)
Blue k&k numberplate backgrounds
k&k throttle cover, and master cylinder cover
Elka 400ex shocks

I think thats about it
It wont be too expensive after i sell my old crap that i dont need.

I would reccomend the cutis sparks 318cc kit to anyone with a 250x..if you have about $2,000 to spend.

[416exmx]

i am going to sell all my mx quads and trailer and kick myself in the *** for wraping all that money up in that stuff.














then reality will set in and i am sure i will build something....???

[NTPracing22]

keep mine in showroom condition so hopefully it'll sell in the spring when the riding fever kicks in

[AlaskaSpeed]

Going to mod out my YFZ 450 for next spring's MX season and trim off 50lbs by getting back into the gym after almost 5 years.....lol........JIM

[roostin_dale]

Looks like it is already modded pretty nice Jim!! Got any pics?

How do you like it compared to the cannondale. I thought about selling my dale for one but i decided to keep her.

[la400ex]

Im gonna finally finish my R. I started out with a bare frame. I live in louisiana so there are plenty days in the winter where its warm enough to ride. I dont exactly have to worry about snow. If everything goes as planned, it will be done in november sometime.

[roostin_dale]

well...my plans are chainging daily...i have finaly figured out what i am going to do and it looks like i'm going to be spendin a lot more money.

Im keepin it a secret for builder of the year even though i dont have a chance.

[jello]

winter... whats that....

[k2-dawg]

I'm gonna ride thru the mud and slop of the Hatfield McCoy trails all winter!!! :blah: :D

[44oEX]

you guys are depressing.

I know working on the bike is fun and putting on new shiny parts is also alot of fun if you have the money.

I also know that alot of you guys don't get any snow just alot of mud.

But for all of you that are lucky enough to get snow and you park
the bike for the winter let me tell you, you don't know what you missing riding on the trail that are like 12ft whide and there are no bumps. just super soft trails.

[Bretmd94]

buying a trx450r :macho And depending on money I will get some a-arms, shocks (im thinking tcs zero preload, or elka) wider axle of some sort, and of course some new beadlocks and tires right when i get it. Oh yeah i should probably get exhaust and what not. I dont want to get beat much at the dunes. I cant wait. I have the 5th on in the valley. :eek:

[roostin_dale]

Originally posted by 44oEX
But for all of you that are lucky enough to get snow and you park
the bike for the winter let me tell you, you don't know what you missing riding on the trail that are like 12ft whide and there are no bumps. just super soft trails.

I have 2 quads and i am only rebuilding one...i can still ride alllll winter

[MOFO]

well, I found out this weekend after riding my rings are finally done. While its opened, I'll be doing a 416kit with some cam (not sure which one yet). Its also going to get the frame redone.... hopefully PC'd....

[bleupoud]

I'll put my proedge when white winter will fall. A bit of toothbrush after the muddy fall and we gonna go for more. Winter riding in Québec is a lot of fun :macho

I will keep my reverse and starter for this one.

[kwatts400]

I'm getting a 450r. I bought my 250r last winter and put some cash into it with a rebuild, new plastics, tires & rims, and some other stuff to get it close to stock in appearance as possible. So the 450r is in order this winter.

[twisted threads]

I got my R tore down and Im going to gusset the frame and repaint it. Im also getting a ESR 350pv cylinder. Im going to get a few more little things but im not sure what yet..... probley new shocks and steering stem.:cool: The EX is going to get nothing done to it exept get muddy all winter!:D

[trailhouseowner]

What's all this talk about rebuilding?? Don't forget the Hatfield McCoy Trails are open 365 days a year. So instead of laboring over some almost impossible tasks, plan a trip to ride this winter at the Hatfield McCoy Trails!!

ok are you guys ready........:blah:


1.pc/gusett 400ex frame/trans blue
2. gibson 400ex front end w/custom axis top chorme lower blue
3. blaster motor/ 1500 motor work done by hetrick
4. gibson/walsh/lsr/roll swingarm with w axis/pep/elak or tcs rear
5. hi-pers hopfully all around
6. blue maier plastic
7.houser/lsr/roll/ or any other kidn of steerign stem
8.lsr axle
9. dr front bumper
10. and alot of other things


and yes....this is a blaster in a 400ex chassis!!!!!!!!!!!!!!

ok are you guys ready........:blah:


1.pc/gusett 400ex frame/trans blue
2. gibson 400ex front end w/custom axis top chorme lower blue
3. blaster motor/ 1500 motor work done by hetrick
4. gibson/walsh/lsr/roll swingarm with w axis/pep/elak or tcs rear
5. hi-pers hopfully all around
6. blue maier plastic
7.houser/lsr/roll/ or any other kidn of steerign stem
8.lsr axle
9. dr front bumper
10. and alot of other things


and yes....this is a blaster in a 400ex chassis!!!!!!!!!!!!!!

[DEAL]

Axle.
416.
Pc'ed frame
new plastic.
rear tires.
new bars.

[LTandRaptorider]

Sell the Raptor, tear down the LT again to decide whether to get the frame checked and gusseted... again! Or spend $1200 for an OEM frame, and get it gusseted and powder coated. Any suggestions? Other than buy a Honda, I mean. I thought of selling the LT also, and getting the YFZ. But I have so much money tied up in the LT, and really like it. I replaced everything last spring with mostly aftermarket products, I may put an aftermarket igniton on it this winter, as the stock ignition is a little weak.

[chucked]

make money (whoa im in debt) , who said I cant ride year round?