lol.. stripped Yoshi end cap hex screw...

[ScreaminZ400]

i accidently stripped the hex screw that hold the end cap on my yoshi and suggestions on getting it out lol thanx

[ridesa02400EX]

drill it out

[chad400ex]

use an ez-out or screw extractor. It's easy to do, and then you won't mess up the threads.

[ScreaminZ400]

where can i get one...

[DREWS400EX]

I used a dremel and cut a line across mine then used a flat screwdriver to get the bolt out.

[Rip_Tear]

Originally posted by ScreaminZ400
where can i get one...
pretty much any automotive place... Just try lubing it up real good (wd-40) and drill a hole in it, it might just spin.... (then try reversing the drill...) I have done it that way a few times just because it worked...

[ScreaminZ400]

Originally posted by DREWS400EX
I used a dremel and cut a line across mine then used a flat screwdriver to get the bolt out. damn good idea man lol

[YamaWarr0121]

i did the same thing..imma go find my dremel right now!

[ScreaminZ400]

didnt work...