PDA

View Full Version : how long till u break in a 400ex



tumbler440Ex
01-18-2002, 08:22 AM
Hi i em wondering when can i start to test out the new 440 kit in it i bought the bike used so i didnt have to worry bout breakin in the bike so i em wondering how long 10 hours someone told me some said 10 tanks of gas and some say 100miles so can somone help i be very thank full thanxs tumbler:devil

ChadEXer
01-18-2002, 09:06 AM
I think its 10 hours? 10 tanks of gas would take a long time. You have no way to tell how may miles you got on her unless you got one of those Speedometer things!

RideRed400EX
01-18-2002, 09:52 AM
It really depends on how you break it in. I have always said two tanks as a rule but, depending on how you ride, it could take less/more time.

knighttime
01-18-2002, 11:11 AM
Ride easy for 15 mins. Let is completely cool down. Ride easy again for 15 minutes. Let is completely cool down again.

You are now broken in

:D

MOFO
01-18-2002, 12:28 PM
Originally posted by knighttime
Ride easy for 15 mins. Let is completely cool down. Ride easy again for 15 minutes. Let is completely cool down again.

You are now broken in

:D


Yep, this is the correct method when you are only breaking in the cam and rings. Just make sure you DO NOT let the bike sit and idle for a period of time...that is very bad when breaking in a new cam.


Eric

NJ300ex
01-19-2002, 10:49 AM
I have always done 2 tanks of gas and then i change the oil. I then run 2 more tanks through and change the oil, adjust valves, and new spark plug.

hangman
01-20-2002, 11:59 AM
I always considered mine broken in after 2 tanks. Dealers say to bring it in after about 10 hrs. to change oil and adjust valves.