yamadooski
07-15-2003, 11:43 AM
I have a 2000 Banshee with all the following.
motor port and polished with 4mm stroker crank.
There is no base plate as we ported it to hide the crank rod.
Cool head with 18 cc domes
Works Tripple Rates w/rezzies
+2 a-arms with aftermarket tie rods
Pro Taper bars
Hydro Clutch
Kept the carbs stock...they have better bottom end
CPI Pipes
+2 Durablue Axle
AC Propeg Nerf Bars
18" tires on Douglas Rims
DG front bumper
AC rear grab bar
The frame has never been cracked or rewelded. Its blue and has the graphic kit on it with the 2 girLS kissing.
I get compliments on it all the time.
I also TT race and this machine dominates the track.
I recently started to do XC racing and I need a 250R all ready all done up.
If interested call Paul at 813-789-6698
motor port and polished with 4mm stroker crank.
There is no base plate as we ported it to hide the crank rod.
Cool head with 18 cc domes
Works Tripple Rates w/rezzies
+2 a-arms with aftermarket tie rods
Pro Taper bars
Hydro Clutch
Kept the carbs stock...they have better bottom end
CPI Pipes
+2 Durablue Axle
AC Propeg Nerf Bars
18" tires on Douglas Rims
DG front bumper
AC rear grab bar
The frame has never been cracked or rewelded. Its blue and has the graphic kit on it with the 2 girLS kissing.
I get compliments on it all the time.
I also TT race and this machine dominates the track.
I recently started to do XC racing and I need a 250R all ready all done up.
If interested call Paul at 813-789-6698