nacs400ex
07-10-2003, 11:07 AM
Ok, I am having a really fun time finding out what I need for the 416. I think after I figure everything out I will be happy.
What I have found out is there is mixed opinions on hardening the rockers with an aftermarket cam. What C&D told me is with the Hotcams stage 2 you cant get hardened rockers because the cam is too soft, and it will shred it apart. Also that the Heavy Duty valve springs are not needed.
I want a cam that has bottom-to-mid range, and the hotcams stage 2 is only top-end. Could you please give me your advice on what cam I should go for and whether to go heavy duty or not.
Thanks
Craig
What I have found out is there is mixed opinions on hardening the rockers with an aftermarket cam. What C&D told me is with the Hotcams stage 2 you cant get hardened rockers because the cam is too soft, and it will shred it apart. Also that the Heavy Duty valve springs are not needed.
I want a cam that has bottom-to-mid range, and the hotcams stage 2 is only top-end. Could you please give me your advice on what cam I should go for and whether to go heavy duty or not.
Thanks
Craig