PDA

View Full Version : stock footpegs wont come off???


400exstunta
07-08-2003, 11:46 AM
ok so i have two bolts that hold the stock footpeg on that are stuck. ive tried beating them with a hammer, soaking them in wd40, and now they are almost rounded out. any ideas???

*edit*
and now ive tried applying heat and vice grips, cant seem to get them on there good enough
400exstunta
07-08-2003, 01:10 PM
alright got them now.
Rip_Tear
07-08-2003, 01:25 PM
lol, so what did it take, just force?
400exstunta
07-08-2003, 02:37 PM
A BFH and alot of heat lol... o and some vice grips... definately some swearing involved.... LOL
07-08-2003, 02:53 PM
Originally posted by 400exstunta
A BFH and alot of heat lol... o and some vice grips... definately some swearing involved.... LOL


Thank you for not sharing what words you used 400exstunta :D
400exstunta
07-08-2003, 03:34 PM
lol

but of course...
.:01_eXrIdEr:.
11-26-2003, 12:27 PM
What size allen wrench did you use to get off the footpegs? Anyone please help.

Thanks, Drew.
.:01_eXrIdEr:.
11-26-2003, 12:46 PM
bump bump

please anyone I need to know fast. any help would be greatly appretiated.

Thanks, Drew
hondafox440
11-26-2003, 01:34 PM
Its a big one. 8mm I believe.
.:01_eXrIdEr:.
11-26-2003, 01:48 PM
Thank you very much! I will try that.

Thanks, Drew.
Juggalo
11-26-2003, 03:23 PM
buy a can of pb blaster and use that instead of WD -40
.:01_eXrIdEr:.
11-26-2003, 07:23 PM
8mm allen wrench was too small. This is for a 400ex and I believe it is in between a 1/2 inch and 3/4 inch but in metric. Any info?

Thanks, Drew.
JOEX
11-26-2003, 08:22 PM
Originally posted by .:01_eXrIdEr:.
8mm allen wrench was too small. This is for a 400ex and I believe it is in between a 1/2 inch and 3/4 inch but in metric. Any info?

Thanks, Drew.
The 8mm fits mine:confused:

Joe
.:01_eXrIdEr:.
11-27-2003, 12:02 AM
Sorry about that guys, it was my friend who was trying to get his ac propegs on and i don't know why he said the 8mm didn't work. We finally got them off and put the propegs on. Has anyone had problems w/ all the bolts and holes not lining up?

Drew
stupid driver
11-27-2003, 09:45 PM
my bolts on my ac propegs lined up perfectly. I was very surprised. i had heard many stories about them not lining up at all. But they did.
dhines
12-01-2003, 07:08 AM
A good solution for those bolts (and many others) is to get a set of sockets with the allen heads on them - it makes it much easier to get torque on the bolts when you're using a socket wrench as opposed to those little allen wrenches.
hondarider2006
12-01-2003, 07:46 AM
I have heard a lot of stories about AC products not lining up properly. Bolth my bumper and nerfs bolted right on, no problem!:p