BROKEN Steel Swingarm

[QuadMatt]

I need a steel swingarm for a go cart project. I only require the rear half. If someone has a swingarm that broke in the front then i will purchase it. It has to be STEEL tho. NO 400EX.

Thanks

[QuadMatt]

To be more specific, I need a rear half of a steel swingarm that will hold my old 400EX bearing carrier. I am thinking that the bearing carriers are all the same on Hondas so any model would work. The reason i need a steel one is so it can be welded.

Thanks again.

[quadcustoms]

your only bet is a 86/87 250r
85 will not accept the carrier and a 300ex/250x will not either
also the the 350x atc used the same style carrier as the 250x/300ex
i do have a couple of 87/87 r swing arms 50.00 is the cheapest
100 for the best one,those are shipped prices
thanks david

[forced-racing]

I got an '86 250r one that has to many cracks to reuse for me and it was chromed. What is it worth to ya. I was just keeping it as a throphy. Let me know.
Thx.

[QuadMatt]

Any thing that works is only worth $25 to me. I understand if its not worth your time.

quadcustoms - thanks for the information

[forced-racing]

Let me know your zip code and I will figure the freight and give you a total and then you decide.
Thx.

[Duncanracer]

Originally posted by quadmatt
Any thing that works is only worth $25 to me. I understand if its not worth your time.

quadcustoms - thanks for the information


so a 88 swing arm with 20 cracks in it wont work....ok...

[QuadMatt]

My ZIP is 10598.

Duncanracer - If the rear portion is holding together than its still usable.

[Duncanracer]

hmm 25$ sounds good to me where u at again?

[forced-racing]

Originally posted by quadmatt
Any thing that works is only worth $25 to me. I understand if its not worth your time.


==========================
Freight looks to be about $15.00 so I could ship it to you for $40.00 if you want it. Just let me know what you decide and I will take if off the wall of fame if you want it.

Thx, Todd
==========================