Dupontster
07-08-2003, 05:29 AM
:confused:
I have a 1987 250X...I just had it bored, new piston, rings, timing chain, tensioners, cam, and lifters. Problem is, it won't start....I get a POP every once and a while, but thats it..I checked the timing (right on) I checked compression (got it) I checked valve adjustment (right on) I checked spark...Got it... The spark is not as bright as I would like it though...Took the CPI box off the other one that I have...Still wouldn't ...Took the coil off the other one that I have ...Still wouldn't...Disconnected the reverse switch..(Do I connect the wires from where that switch comes from?)
Still wouldn't...The other 250X that I have is running fine...I have been switching parts back and forth to try to get this one going...Still nothing...I have tried a little starting fluid, but I don't like that stuff on a new startup....I DO have gas in it....I have taken the lights off....I took the switch out...Is there some way to just basic wire it so it will just run...I don't need all the lights and BS...I just want to kick and go....It was running fine before the overhaul...Smoking like hell though..PLEASE HELP....Any suggestions would help....:confused:
I have a 1987 250X...I just had it bored, new piston, rings, timing chain, tensioners, cam, and lifters. Problem is, it won't start....I get a POP every once and a while, but thats it..I checked the timing (right on) I checked compression (got it) I checked valve adjustment (right on) I checked spark...Got it... The spark is not as bright as I would like it though...Took the CPI box off the other one that I have...Still wouldn't ...Took the coil off the other one that I have ...Still wouldn't...Disconnected the reverse switch..(Do I connect the wires from where that switch comes from?)
Still wouldn't...The other 250X that I have is running fine...I have been switching parts back and forth to try to get this one going...Still nothing...I have tried a little starting fluid, but I don't like that stuff on a new startup....I DO have gas in it....I have taken the lights off....I took the switch out...Is there some way to just basic wire it so it will just run...I don't need all the lights and BS...I just want to kick and go....It was running fine before the overhaul...Smoking like hell though..PLEASE HELP....Any suggestions would help....:confused: