pep website?

[Nausty]

Anyone know I wanted to check out their zps shocks?

http://www.motoxcentral.com/fmx/phillyfmx02/adams.jpg

[Foxrage]

they dont have one but check out baldwinmotorsports.com

[Nausty]

I checked it out. They have the zps shocks but they don't show the prices. Anyone know how much for front and rear zps shocks? Anything else I should get before I get the shocks? I was wondering if I would have to buy new shocks if I get a longer swing arm or wider a-arms or what I would need to do.

[trx400ex]

they show pics at baldwins website, thats were my shocks are right now, getting rebiult, front and rear zps will run at least 1800$ wider aarms are a must if you mx and a 1 inch longer swingarm will help all around. i suggest the standard peps, the fronts are only 600 and the rear is 750,, a VERY good shock and i think it might be the best value out there, for recreation only i would get a 2 inch wider axle and pep standard front shocks, the rear shock is fine unless you are really heavy

[Foxrage]

You can get the rear conversion from them for ZPS for about 425 and the fronts for 900.

[Dave400ex]

I would get the PEP ZPS Fronts and have the Stock Rear Shock Converted to ZPS. The Front Shocks are $895 and the Rear Conversion is $425. If you get Wider A-Arms and a Longer Swingarm you can send the Shocks back to Baldwin and he will rebuild them for the Wider A-Arms and Longer Swingarm. You don`t have to buy new Shocks. I think the Front ZPS and the Rear ZPS Conversion is the way to go.

[Nausty]

I think when we get new shocks I will be getting the front zps or standards and then as I get more money and depending on how bad I would need it I would get a new rear shock conversion or the zps rear shock.

[Dave400ex]

Sounds like a Plan.

[SGA]

www.atving.com/editor/review/accessory/shocks/pep/pepshocks.htm

heres some good info on pep shocks

[SGA]

www.atving.com/editor/review/accessory/shocks/pep/review.htm

Heres another good one

[Nausty]

thanks for the info sgaexer I will show my dad this weekend. We will probably get them when we sell one of the other toys like the blaster or yz80. That and a 416 kit and cam.

[Dave400ex]

There is a lot of good Info on those Pages. I will get my Shocks from Baldwin. If you get PEP Shocks and build the Motor you will have one awesome 400EX.

[Nausty]

yeah it will probably be a while though tell we sell some stuff.

[Nausty]

ok about how big of jumps will I be able to jump with standards or limited mass? I think zps will be out of the budget but I would basicly like to jump any reasonable sized jump without have to worry about how much its gonna hurt when i land because right not it bottems out at about 7ft with a flat landing and I will definately wanna go bigger than that. Like 12 will be the most with a flat landing because I plan on getting pretty big on jumps and freestyle once my dad and I build a kicker ramp. Umm you know that part of heuvo's 3 where it starts off at buckeyes i think and the linkin park one step closer is playing it has the hill as a landing I would be jumping jumps like that sept a little smaller. Like 60ft at most.

[51]

if you get them set up correctly you'll be able to hit any size double with any of the shocks you mentioned with out bottoming..i have a set of standfard fronts now and i really like them....toby